sorry for my english
I used the passthrough before on my intel Intel Dual Band Wireless-AC 8260 ,it work but when i connect 2p wiimote it wii disconnect after 10~30sec ,
so i buy BCM20702A0 Adapter but it show
Failed to open Bluetooth device: LIBUSB_ERROR_NOT_SUPPORTED ,i try to force my adapter but when i save the ini file it didn't work and if i restart the dolphin the setting wii back to -1 , what shoud i do ? emulator bluetooth is so lag on wii sport resort .
(01-26-2018, 08:08 PM)stardusstt Wrote: [ -> ]sorry for my english
I used the passthrough before on my intel Intel Dual Band Wireless-AC 8260 ,it work but when i connect 2p wiimote it wii disconnect after 10~30sec ,
so i buy BCM20702A0 Adapter but it show Failed to open Bluetooth device: LIBUSB_ERROR_NOT_SUPPORTED ,i try to force my adapter but when i save the ini file it didn't work and if i restart the dolphin the setting wii back to -1 , what shoud i do ? emulator bluetooth is so lag on wii sport resort .
Install LibUSB for that bluetooth adapter.
I try libusb and libubsk ,didn,t work
Adapter: Broadcom BCM20702A0 Orico Bta408
Pairing: Yes and remember, I was able to achieve with a Wiimote RVL-CNT-01. I do not have any more drivers to test 2-4 concurrent pairs, though. Force to connect
1: Download the latest Windows build
https://br.dolphin-emu.org/download/
2: Download Zadig:
http://zadig.akeo.ie/
3: Select the Bluetooth adapter (For broadcom, this is the BCM20702A0 entry) and click Replace Driver
4 note the hexadecimal codes you see in USB ID. (For my broadcom, it's 0A5C and 21EC
5: Convert your codes one at a time into decimal values:
http://www.binaryhexconverter.com/hex-to...-converter in my case gave [BluetoothPassthrough]
Enabled = True
VID = 2652
PID = 8684
C: \ Users \ <User> \ Documents \ Dolphin Emulator \ Config) and open the dolphin.ini.
Ready now it works
(01-28-2018, 11:31 PM)zebranco Wrote: [ -> ]Adapter: Broadcom BCM20702A0 Orico Bta408
Pairing: Yes and remember, I was able to achieve with a Wiimote RVL-CNT-01. I do not have any more drivers to test 2-4 concurrent pairs, though. Force to connect
1: Download the latest Windows build https://br.dolphin-emu.org/download/
2: Download Zadig: http://zadig.akeo.ie/
3: Select the Bluetooth adapter (For broadcom, this is the BCM20702A0 entry) and click Replace Driver
4 note the hexadecimal codes you see in USB ID. (For my broadcom, it's 0A5C and 21EC
5: Convert your codes one at a time into decimal values: http://www.binaryhexconverter.com/hex-to...-converter in my case gave [BluetoothPassthrough]
Enabled = True
VID = 2652
PID = 8684
C: \ Users \ <User> \ Documents \ Dolphin Emulator \ Config) and open the dolphin.ini.
Ready now it works
i do it again ,though i did it before ,now it works , i don't know why , thanks .
