the passthrough BCM20702A0 problem

[stardusstt]

sorry for my english

I used the passthrough before on my intel Intel Dual Band Wireless-AC 8260 ,it work but when i connect 2p wiimote it wii disconnect  after 10~30sec ,
so i buy BCM20702A0 Adapter but it show Failed to open Bluetooth device: LIBUSB_ERROR_NOT_SUPPORTED  ,i try to   force my adapter but when i save the ini file it didn't work and if i restart the dolphin the setting wii back to -1  , what shoud i do ?   emulator bluetooth is so lag on wii sport resort .

[mstreurman]

(01-26-2018, 08:08 PM)stardusstt Wrote: sorry for my english

I used the passthrough before on my intel Intel Dual Band Wireless-AC 8260 ,it work but when i connect 2p wiimote it wii disconnect  after 10~30sec ,
so i buy BCM20702A0 Adapter but it show Failed to open Bluetooth device: LIBUSB_ERROR_NOT_SUPPORTED  ,i try to   force my adapter but when i save the ini file it didn't work and if i restart the dolphin the setting wii back to -1  , what shoud i do ?   emulator bluetooth is so lag on wii sport resort .

Install LibUSB for that bluetooth adapter.

[stardusstt]

I try libusb and libubsk ,didn,t work

[stardusstt]

(01-26-2018, 08:53 PM)mstreurman Wrote: Install LibUSB for that bluetooth adapter。

[color=#000000][color=#000000]I try libusb and libubsk ,didn't work[/color][/color]

[zebranco]

Adapter: Broadcom BCM20702A0 Orico Bta408
Pairing: Yes and remember, I was able to achieve with a Wiimote RVL-CNT-01. I do not have any more drivers to test 2-4 concurrent pairs, though. Force to connect

1: Download the latest Windows build https://br.dolphin-emu.org/download/
2: Download Zadig: http://zadig.akeo.ie/
3: Select the Bluetooth adapter (For broadcom, this is the BCM20702A0 entry) and click Replace Driver
4 note the hexadecimal codes you see in USB ID. (For my broadcom, it's 0A5C and 21EC
5: Convert your codes one at a time into decimal values: http://www.binaryhexconverter.com/hex-to-decimal-converter in my case gave [BluetoothPassthrough]
Enabled = True
VID = 2652
PID = 8684
C: \ Users \ <User> \ Documents \ Dolphin Emulator \ Config) and open the dolphin.ini.
Ready now it works

[stardusstt]

(01-28-2018, 11:31 PM)zebranco Wrote: Adapter: Broadcom BCM20702A0 Orico Bta408
Pairing: Yes and remember, I was able to achieve with a Wiimote RVL-CNT-01. I do not have any more drivers to test 2-4 concurrent pairs, though. Force to connect

1: Download the latest Windows build https://br.dolphin-emu.org/download/
2: Download Zadig: http://zadig.akeo.ie/
3: Select the Bluetooth adapter (For broadcom, this is the BCM20702A0 entry) and click Replace Driver
4 note the hexadecimal codes you see in USB ID. (For my broadcom, it's 0A5C and 21EC
5: Convert your codes one at a time into decimal values: http://www.binaryhexconverter.com/hex-to-decimal-converter in my case gave [BluetoothPassthrough]
Enabled = True
VID = 2652
PID = 8684
C: \ Users \ <User> \ Documents \ Dolphin Emulator \ Config) and open the dolphin.ini.
Ready now it works

i do it again ,though  i did it  before  ,now it works , i don't know why ,  thanks .