hey guys i just downloaded dolphin r7419 today and it works really good but my problem is my A button i set it to example V and i use the A button it beeps and it is really anoying can anyway help me get rid of the beeping noise you know the ding noise it makes that sound if anyone can help i will be very appericative
Tell us what Configuration are you using Wiimote or GCPad which one? , also if you're using a joystick or something like that, it could be the problem. Dunno, others may help you.
Edit: In Gamecube check your Device Settings, and the ports, that could be the problem of Beep.
im using GCPad and im using a keyboard
Check your device settings, Config - Gamecube, "ports"
Also, this can happen only in your Build,
In this case if the problem follows appearing, you must download latest version of Dolphin, "Revisions".
Tell us, if the problem persists
Edit: Device Settings --> Must be like here.
Slot A: Memory Card
Slot B: Nothing
SP 1: Nothing
Port 1: Standard Controller
Port 2: Nothing
Port 3: Nothing
Port 4: Nothing
here are gcpad setting
Device = DInput/0/Keyboard Mouse
Buttons/A = V
Buttons/B = B
Buttons/X = X
Buttons/Y = Y
Buttons/Z = Z
Buttons/Start = SPACE
Main Stick/Up = UP
Main Stick/Down = DOWN
Main Stick/Left = LEFT
Main Stick/Right = RIGHT
Main Stick/Modifier = LSHIFT
Main Stick/Modifier/Range = 50.000000
C-Stick/Up = A
C-Stick/Down = S
C-Stick/Left = D
C-Stick/Right = Q
C-Stick/Modifier = LCONTROL
C-Stick/Modifier/Range = 50.000000
Triggers/L = L
Triggers/R = R
D-Pad/Up = T
D-Pad/Down = G
D-Pad/Left = F
D-Pad/Right = H
Did you check Config > Gamecube Device settings?.
I saw your configuration and nothing is wrong.
Edit: Device Settings --> Must be like here.
Slot A: Memory Card
Slot B: Nothing
SP 1: Nothing
Port 1: Standard Controller
Port 2: Nothing
Port 3: Nothing
Port 4: Nothing
Don't use Rumble Motor in GCPad.
yep i got all the settings
Then, i don't know really the problem, download latest revision of Dolphin, this means version 3.0-376 .
Tell us if the problem persists.
Go to GCPad and enable Background Input <--- This Should work!