Reciently upgraded my phone and it gave me the chance to get off the PC version. I programmed in swing commands by pressing two buttons (z and + etc). Not only did I do this for one game no I did this for my collection. And each game used its own button profile ie: Mario's shake was "home" and Call of Duty "home" was the normal home button. But as for each game is different and you and I may not be playing the same games, It'll be demonstrated how I accomplished this. You're going to do the work. But it's going to work.
First download a text editor, I suggest Jota it works pretty good not great. But turning off the "save a backup" option turns it from pretty good, into yah it's good.
So let's get started..
The game needs its own settings file
1) press and hold the game cover art, select any option, save it, press and hold again and turn it back. Make note of the letters and numbers at the bottom that show up.
The directory that the file is in is
/dolphin-emu/GameSettings
Good that's done
Next step.
Start the game and change some sort of control setting. Then exit out, this will create a controller code rule for the game. File is and located at
/dolphin-emu/Config/profiles/wiimote/Wiimoteprofile.ini
Were going to open Jota now and load this Wiimoteprofile.ini file.
Here's the fun part. Scroll down. See where it says
swing/right = `Axis 1xx`
swing/left `Axis 1xx`
`Button 201` is button z
Looking at the top of the Jota page you'll see a whole list of `Buttons` and their corresponding push on the screen.
So to combine two at once. Do it like this
Swing/Left = `Button 100` & `Button 201`
For standard swings and pokes
Swing/Down = (`Button 102` & `Button 201`) | (`Button 201` & `Button 102`)
Swing/Right = (`Button 201` & `Button 102`) | (`Button 102` & `Button 201`)
For diagonal cuts
Shake/X = `Button 104`
Shake/Y = `Button 104`
Shake/Z = `Button 104`
Save the edited file as the games name.
now in Jota browse to and open the custom settings file that we made in step 1.
The command to have the controller file opened needs to be entered as following.
At the line before [DSP]
write
[Controls]
WiimoteProfile1 = (enter the name no .ini)
Save the file and you're done. Happy gaming y'all.
Cya
EDGE
First download a text editor, I suggest Jota it works pretty good not great. But turning off the "save a backup" option turns it from pretty good, into yah it's good.
So let's get started..
The game needs its own settings file
1) press and hold the game cover art, select any option, save it, press and hold again and turn it back. Make note of the letters and numbers at the bottom that show up.
The directory that the file is in is
/dolphin-emu/GameSettings
Good that's done
Next step.
Start the game and change some sort of control setting. Then exit out, this will create a controller code rule for the game. File is and located at
/dolphin-emu/Config/profiles/wiimote/Wiimoteprofile.ini
Were going to open Jota now and load this Wiimoteprofile.ini file.
Here's the fun part. Scroll down. See where it says
swing/right = `Axis 1xx`
swing/left `Axis 1xx`
`Button 201` is button z
Looking at the top of the Jota page you'll see a whole list of `Buttons` and their corresponding push on the screen.
So to combine two at once. Do it like this
Swing/Left = `Button 100` & `Button 201`
For standard swings and pokes
Swing/Down = (`Button 102` & `Button 201`) | (`Button 201` & `Button 102`)
Swing/Right = (`Button 201` & `Button 102`) | (`Button 102` & `Button 201`)
For diagonal cuts
Shake/X = `Button 104`
Shake/Y = `Button 104`
Shake/Z = `Button 104`
Save the edited file as the games name.
now in Jota browse to and open the custom settings file that we made in step 1.
The command to have the controller file opened needs to be entered as following.
At the line before [DSP]
write
[Controls]
WiimoteProfile1 = (enter the name no .ini)
Save the file and you're done. Happy gaming y'all.
Cya
EDGE