I found this post that shows how to configure the DS4 to play Mario Galaxy on Windows and I'm wondering if there's anyway to get a similar result with mac. I load the profile but I'm assuming the ds4windows is contributing to make it function. Any help would be great!
[color=#000000]1) Install DS4windows [/color][color=#006abd]http://ds4windows.com/[/color]
[color=#000000]2) Using profiles, leave everything unmapped, except ds4 motion control. Map tilt to xbox360 right stick.[/color]
[color=#000000]3) On settings, select xinput ports 2.[/color]
[color=#000000]4) On controllers, assing the profile to your ds4.[/color]
[color=#000000]5) Again on settings test the gamepad on control panel. Everything should go to the generic windows controller except motion, that should go to xbox360 right stick.[/color]
[color=#000000]6) On Dolphin gamepad profiles folder, paste this, and save as motion.ini:[/color]
[color=#000000][Profile][/color]
[color=#000000]Device = DInput/0/Wireless Controller[/color]
[color=#000000]Buttons/A = `Button 1`[/color]
[color=#000000]Buttons/B = `Button 7`[/color]
[color=#000000]Buttons/1 = `Button 3`[/color]
[color=#000000]Buttons/2 = `Button 2`[/color]
[color=#000000]Buttons/- = `Button 8`[/color]
[color=#000000]Buttons/+ = `Button 9`[/color]
[color=#000000]Buttons/Home = `Button 11`[/color]
[color=#000000]IR/Up = `Axis Zr-`[/color]
[color=#000000]IR/Down = `Axis Zr+`[/color]
[color=#000000]IR/Left = `Axis Z-`[/color]
[color=#000000]IR/Right = `Axis Z+`[/color]
[color=#000000]IR/Hide = `Button 5`[/color]
[color=#000000]Shake/Z = `Button 0`[/color]
[color=#000000]Extension = Nunchuk[/color]
[color=#000000]Nunchuk/Buttons/C = `Button 4`[/color]
[color=#000000]Nunchuk/Buttons/Z = `Button 6`[/color]
[color=#000000]Nunchuk/Stick/Up = `Axis Y-`[/color]
[color=#000000]Nunchuk/Stick/Down = `Axis Y+`[/color]
[color=#000000]Nunchuk/Stick/Left = `Axis X-`[/color]
[color=#000000]Nunchuk/Stick/Right = `Axis X+`[/color]
[color=#000000]Nunchuk/Shake/X = `Button 10`[/color]
[color=#000000]D-Pad/Up = `Hat 0 N`[/color]
[color=#000000]D-Pad/Down = `Hat 0 S`[/color]
[color=#000000]D-Pad/Left = `Hat 0 W`[/color]
[color=#000000]D-Pad/Right = `Hat 0 E`[/color]
[color=#000000]Tilt/Forward = `XInput/0/Gamepad:Right Y-`[/color]
[color=#000000]Tilt/Backward = `XInput/0/Gamepad:Right Y+`[/color]
[color=#000000]Tilt/Left = `XInput/0/Gamepad:Right X-`[/color]
[color=#000000]Tilt/Right = `XInput/0/Gamepad:Right X+`[/color]
[color=#000000]7) On Dolphin wiimote emulated config, select and load this profile.[/color]
[color=#000000]1) Install DS4windows [/color][color=#006abd]http://ds4windows.com/[/color]
[color=#000000]2) Using profiles, leave everything unmapped, except ds4 motion control. Map tilt to xbox360 right stick.[/color]
[color=#000000]3) On settings, select xinput ports 2.[/color]
[color=#000000]4) On controllers, assing the profile to your ds4.[/color]
[color=#000000]5) Again on settings test the gamepad on control panel. Everything should go to the generic windows controller except motion, that should go to xbox360 right stick.[/color]
[color=#000000]6) On Dolphin gamepad profiles folder, paste this, and save as motion.ini:[/color]
[color=#000000][Profile][/color]
[color=#000000]Device = DInput/0/Wireless Controller[/color]
[color=#000000]Buttons/A = `Button 1`[/color]
[color=#000000]Buttons/B = `Button 7`[/color]
[color=#000000]Buttons/1 = `Button 3`[/color]
[color=#000000]Buttons/2 = `Button 2`[/color]
[color=#000000]Buttons/- = `Button 8`[/color]
[color=#000000]Buttons/+ = `Button 9`[/color]
[color=#000000]Buttons/Home = `Button 11`[/color]
[color=#000000]IR/Up = `Axis Zr-`[/color]
[color=#000000]IR/Down = `Axis Zr+`[/color]
[color=#000000]IR/Left = `Axis Z-`[/color]
[color=#000000]IR/Right = `Axis Z+`[/color]
[color=#000000]IR/Hide = `Button 5`[/color]
[color=#000000]Shake/Z = `Button 0`[/color]
[color=#000000]Extension = Nunchuk[/color]
[color=#000000]Nunchuk/Buttons/C = `Button 4`[/color]
[color=#000000]Nunchuk/Buttons/Z = `Button 6`[/color]
[color=#000000]Nunchuk/Stick/Up = `Axis Y-`[/color]
[color=#000000]Nunchuk/Stick/Down = `Axis Y+`[/color]
[color=#000000]Nunchuk/Stick/Left = `Axis X-`[/color]
[color=#000000]Nunchuk/Stick/Right = `Axis X+`[/color]
[color=#000000]Nunchuk/Shake/X = `Button 10`[/color]
[color=#000000]D-Pad/Up = `Hat 0 N`[/color]
[color=#000000]D-Pad/Down = `Hat 0 S`[/color]
[color=#000000]D-Pad/Left = `Hat 0 W`[/color]
[color=#000000]D-Pad/Right = `Hat 0 E`[/color]
[color=#000000]Tilt/Forward = `XInput/0/Gamepad:Right Y-`[/color]
[color=#000000]Tilt/Backward = `XInput/0/Gamepad:Right Y+`[/color]
[color=#000000]Tilt/Left = `XInput/0/Gamepad:Right X-`[/color]
[color=#000000]Tilt/Right = `XInput/0/Gamepad:Right X+`[/color]
[color=#000000]7) On Dolphin wiimote emulated config, select and load this profile.[/color]