install and configure ds4 dsu mode on dolphin

[zebranco]

1 install DS4Windows https://github.com/Ryochan7/DS4Windows/releases/

2 open DS4Windows.exe

3 save appdata settings

4 install ViGEmBus driver "in case of windows 7 also install 360 Driver


5 go to settings and check UDP server


Go to C: \ Users \ YOU \ USER \ Documents \ Dolphin Emulator \ Config \ Profiles \ Wiimote and save the file DualShock 4 DS4 WII MOTION PLUS.ini with the code

Code:

[Profile]
Device = DSUClient/0/DualShock 4
Buttons/A = Cross
Buttons/B = Square
Buttons/1 = Triangle
Buttons/2 = Circle
Buttons/- = Share
Buttons/+ = Options
Buttons/Home = !LMENU & RETURN
IR/Up = `Right Y+`
IR/Down = `Right Y-`
IR/Left = `Right X-`
IR/Right = `Right X+`
IR/Center = 0.00 0.00
Swing/Center = 0.00 0.00
Tilt/Forward = `L3`
Tilt/Backward = `R3`
Tilt/Left = `L2`
Tilt/Right = `R2`
Tilt/Center = 0.00 0.00
Shake/X = `L3`
Shake/Y = `L3`
Shake/Z = `L3`
IMUAccelerometer/Left = Accel Left
IMUAccelerometer/Right = Accel Right
IMUAccelerometer/Forward = Accel Forward
IMUAccelerometer/Backward = Accel Backward
IMUAccelerometer/Up = Accel Up
IMUAccelerometer/Down = Accel Down
IMUGyroscope/Pitch Up = Gyro Pitch Up
IMUGyroscope/Pitch Down = Gyro Pitch Down
IMUGyroscope/Roll Left = Gyro Roll Left
IMUGyroscope/Roll Right = Gyro Roll Right
IMUGyroscope/Yaw Left = Gyro Yaw Left
IMUGyroscope/Yaw Right = Gyro Yaw Right
Extension = Nunchuk
Nunchuk/Buttons/C = `R1`
Nunchuk/Buttons/Z = `L1`
Nunchuk/Stick/Up = `Left Y+`
Nunchuk/Stick/Down = `Left Y-`
Nunchuk/Stick/Left = `Left X-`
Nunchuk/Stick/Right = `Left X+`
Nunchuk/Stick/Calibration = 100.00 141.42 100.00 141.42 100.00 141.42 100.00 141.42
Nunchuk/Stick/Center = 0.00 0.00
Nunchuk/Swing/Center = 0.00 0.00
Nunchuk/Tilt/Center = 0.00 0.00
Nunchuk/Shake/X = `R3`
Nunchuk/Shake/Y = `R3`
Nunchuk/Shake/Z = `R3`
Classic/Buttons/A = Circle
Classic/Buttons/B = Cross
Classic/Buttons/X = Triangle
Classic/Buttons/Y = Square
Classic/Buttons/ZL = `L2`
Classic/Buttons/ZR = `R2`
Classic/Buttons/- = Share
Classic/Buttons/+ = Options
Classic/Buttons/Home = HOME
Classic/Left Stick/Up = `Left Y+`
Classic/Left Stick/Down = `Left Y-`
Classic/Left Stick/Left = `Left X-`
Classic/Left Stick/Right = `Left X+`
Classic/Left Stick/Center = 0.00 0.00
Classic/Right Stick/Up = `Right Y+`
Classic/Right Stick/Down = `Right Y-`
Classic/Right Stick/Left = `Right X-`
Classic/Right Stick/Right = `Right X+`
Classic/Right Stick/Center = 0.00 0.00
Classic/Triggers/L = `L1`
Classic/Triggers/R = `R1`
Classic/Triggers/L-Analog = `L2`
Classic/Triggers/R-Analog = `R2`
Classic/D-Pad/Up = `Pad N`
Classic/D-Pad/Down = `Pad S`
Classic/D-Pad/Left = `Pad W`
Classic/D-Pad/Right = `Pad E`
Guitar/Frets/Green = Cross
Guitar/Frets/Red = Circle
Guitar/Frets/Yellow = Triangle
Guitar/Frets/Blue = Square
Guitar/Frets/Orange = `L1`
Guitar/Strum/Up = `Pad N`
Guitar/Strum/Down = `Pad S`
Guitar/Buttons/- = Share
Guitar/Buttons/+ = Options
Guitar/Stick/Up = `Pad N`
Guitar/Stick/Down = `Pad S`
Guitar/Stick/Left = `Pad W`
Guitar/Stick/Right = `Pad E`
Guitar/Stick/Center = 0.00 0.00
Guitar/Whammy/Bar = `R1`
Guitar/Slider Bar/Left = `L2`
Guitar/Slider Bar/Right = `R2`
Drums/Pads/Red = Cross
Drums/Pads/Yellow = Circle
Drums/Pads/Blue = Triangle
Drums/Pads/Orange = Square
Drums/Pads/Green = `L1`
Drums/Pads/Bass = `R1`
Drums/Stick/Up = `Pad N`
Drums/Stick/Down = `Pad S`
Drums/Stick/Left = `Pad W`
Drums/Stick/Right = `Pad E`
Drums/Stick/Center = 0.00 0.00
Drums/Buttons/- = Share
Drums/Buttons/+ = Options
Turntable/Buttons/Green Left = `L1`
Turntable/Buttons/Red Left = Square
Turntable/Buttons/Blue Left = Cross
Turntable/Buttons/Green Right = `R1`
Turntable/Buttons/Red Right = Triangle
Turntable/Buttons/Blue Right = Circle
Turntable/Buttons/- = Share
Turntable/Buttons/+ = Options
Turntable/Table Left/Left = `Left X-`
Turntable/Table Left/Right = `Left X+`
Turntable/Table Right/Left = `Right X-`
Turntable/Table Right/Right = `Right X+`
Turntable/Stick/Up = `Pad N`
Turntable/Stick/Down = `Pad S`
Turntable/Stick/Left = `Pad W`
Turntable/Stick/Right = `Pad E`
Turntable/Stick/Center = 0.00 0.00
Turntable/Effect/Left = `Thumb L`
Turntable/Effect/Right = `Thumb R`
Turntable/Crossfade/Left = `L2`
Turntable/Crossfade/Right = `R2`
uDraw/Buttons/Rocker Up = `R1`
uDraw/Buttons/Rocker Down = `L1`
uDraw/Stylus/Up = `Left Y+`
uDraw/Stylus/Down = `Left Y-`
uDraw/Stylus/Left = `Left X-`
uDraw/Stylus/Right = `Left X+`
uDraw/Stylus/Center = 0.00 0.00
uDraw/Touch/Pressure = Cross
Drawsome/Stylus/Up = `Left Y+`
Drawsome/Stylus/Down = `Left Y-`
Drawsome/Stylus/Left = `Left X-`
Drawsome/Stylus/Right = `Left X+`
Drawsome/Stylus/Center = 0.00 0.00
Drawsome/Touch/Pressure = Cross
TaTaCon/Center/Left = `L1`
TaTaCon/Center/Right = `R1`
TaTaCon/Rim/Left = `Pad W`
TaTaCon/Rim/Right = Circle
D-Pad/Up = `Pad N`
D-Pad/Down = `Pad S`
D-Pad/Left = `Pad W`
D-Pad/Right = `Pad E`

7 open dolphin go in controls and configure wii remote mark device dsu client and load on profile created

[zebranco]

Gamecube profile save in C:\Users\YOUR USER\Documents\Dolphin Emulator\Config\Profiles\GCPad

DualShock 4 DS4 MOTION GAMECUBE.ini

Code:

[Profile]
Device = DSUClient/0/DualShock 4
Buttons/A = Cross
Buttons/B = Square
Buttons/X = Circle
Buttons/Y = Triangle
Buttons/Z = Share
Buttons/Start = Options
Main Stick/Up = `Left Y+`
Main Stick/Down = `Left Y-`
Main Stick/Left = `Left X-`
Main Stick/Right = `Left X+`
Main Stick/Modifier = `Thumb L`
Main Stick/Calibration = 100.00 141.42 100.00 141.42 100.00 141.42 100.00 141.42
Main Stick/Center = 0.00 0.00
C-Stick/Up = `Right Y+`
C-Stick/Down = `Right Y-`
C-Stick/Left = `Right X-`
C-Stick/Right = `Right X+`
C-Stick/Modifier = `Thumb R`
C-Stick/Calibration = 100.00 141.42 100.00 141.42 100.00 141.42 100.00 141.42
C-Stick/Center = 0.00 0.00
Triggers/L = `L1`
Triggers/R = `R1`
Triggers/L-Analog = `L2`
Triggers/R-Analog = `R2`
D-Pad/Up = `Pad N`
D-Pad/Down = `Pad S`
D-Pad/Left = `Pad W`
D-Pad/Right = `Pad E`

[mbc07]

Um, apart from enabling DSU Server on DS4Windows, there's no need to manually edit or create controller profiles. That part is detailed on the DSU Client guide...

[zebranco]

(01-06-2020, 12:56 PM)mbc07 Wrote: Um, apart from enabling DSU Server on DS4Windows, there's no need to manually edit or create controller profiles. That part is detailed on the DSU Client guide...

the profile I created mapped all buttons to DualShock 4 CUH-ZCT2 including all accessories for wii remote and gamecube

dolphin profile only maps the gyro

well that could be included in dolphin the button mappings

[seavers11]

I made it like you said here in description, and all is working fine !

THANK YOU

The only thing i dont get to work :

The pointer will not go to the frame of my monitor ?

It only goes 5cm from frame, so you cant select some thing in games ?

Any Solution ?

[JosJuice]

(04-02-2020, 10:42 PM)seavers11 Wrote: The only thing i dont get to work :

The pointer will not go to the frame of my monitor ?

It only goes 5cm from frame, so you cant select some thing in games ?

Any Solution ?

Increase the Total Pitch and Total Yaw settings.

[seavers11]

(04-02-2020, 10:45 PM)JosJuice Wrote: Increase the Total Pitch and Total Yaw settings.

It doesn´t change anything here ???

[seavers11]

(04-02-2020, 10:45 PM)JosJuice Wrote: Increase the Total Pitch and Total Yaw settings.

Here you see, on the right side the hand... This is the end i can get the cursor

[Impendable]

(01-06-2020, 12:08 PM)zebranco Wrote: 5 go to settings and check UDP server



Hello, this step... My setup of DS4 doesn't have it. It instead looks like the attachment provided and it says I have the latest updates. What am I doing wrong?

[ForkWNY]

Thanks for providing the config.

Wanted to add that when streaming Dolphin through a streaming client such as Parsec, you can install DS4Windows on the Parsec CLIENT and point Dolphin (running on the host/Parsec server) at the client's IP for the DSU input. I do this so that I can stream Dolphin to my laptop from a much more powerful gaming rig in a different location of the house, and it works quite well. No lag or latency on the local network.

The config was helpful since the DS4 button mappings are not included by default.