Gamecube adapter detected but controller unresponsive [linux]

[sp00kyb00g13]

I am using the mayflash 4-1 adapter.

I am also running linux and have followed the instructions here.

The adapter can be seen as shown in the following image
 


but when I start up the game the controller has no effect.

I have tried to set the adapter to both pc or wii-u mode and they have similar behaviours (can see the adapter but controllers dont work).

Here is the output of udevadm monitor:

Code:

KERNEL[1155.277587] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10 (usb)
KERNEL[1155.281335] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0 (usb)
KERNEL[1155.293100] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:057E:0337.000B (hid)
KERNEL[1155.308743] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/usbmisc/hiddev4 (usbmisc)
KERNEL[1155.308947] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:057E:0337.000B/hidraw/hidraw7 (hidraw)
UDEV  [1155.312616] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10 (usb)
UDEV  [1155.313208] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0 (usb)
UDEV  [1155.313806] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:057E:0337.000B (hid)
UDEV  [1155.314110] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/usbmisc/hiddev4 (usbmisc)
UDEV  [1155.314139] add      /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:057E:0337.000B/hidraw/hidraw7 (hidraw)

Here is the output of dmesg:

Code:

[ 1154.897058] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[ 1155.299050] hid-generic 0003:057E:0337.000B: hiddev0,hidraw7: USB HID v1.10 Device [Nintendo WUP-028] on usb-0000:03:00.0-10/input0

Any ideas ?

[ExtremeDude2]

What game are you trying to play?

[sp00kyb00g13]

(08-02-2017, 03:22 AM)ExtremeDude2 Wrote: What game are you trying to play?

I am trying to play, super smash bros melee

[leolam]

Does the user you're running Dolphin under have permission to access the GC adapter?

[sp00kyb00g13]

(08-04-2017, 03:30 PM)leolam Wrote: Does the user you're running Dolphin under have permission to access the GC adapter?

I believe so, I added the following udev rule which should accomplish this:

Code:

SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="057e", ATTRS{idProduct}=="0337", MODE="0666"