I am using the mayflash 4-1 adapter.
I am also running linux and have followed the instructions here.
The adapter can be seen as shown in the following image
but when I start up the game the controller has no effect.
I have tried to set the adapter to both pc or wii-u mode and they have similar behaviours (can see the adapter but controllers dont work).
Here is the output of udevadm monitor:
Here is the output of dmesg:
Any ideas ?
I am also running linux and have followed the instructions here.
The adapter can be seen as shown in the following image
but when I start up the game the controller has no effect.
I have tried to set the adapter to both pc or wii-u mode and they have similar behaviours (can see the adapter but controllers dont work).
Here is the output of udevadm monitor:
Code:
KERNEL[1155.277587] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10 (usb)
KERNEL[1155.281335] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0 (usb)
KERNEL[1155.293100] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:057E:0337.000B (hid)
KERNEL[1155.308743] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/usbmisc/hiddev4 (usbmisc)
KERNEL[1155.308947] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:057E:0337.000B/hidraw/hidraw7 (hidraw)
UDEV [1155.312616] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10 (usb)
UDEV [1155.313208] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0 (usb)
UDEV [1155.313806] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:057E:0337.000B (hid)
UDEV [1155.314110] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/usbmisc/hiddev4 (usbmisc)
UDEV [1155.314139] add /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:057E:0337.000B/hidraw/hidraw7 (hidraw)
Here is the output of dmesg:
Code:
[ 1154.897058] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[ 1155.299050] hid-generic 0003:057E:0337.000B: hiddev0,hidraw7: USB HID v1.10 Device [Nintendo WUP-028] on usb-0000:03:00.0-10/input0
Any ideas ?