Hi all
I had also problems like many I read to get the RVL-CNT-01-TR working in dolphin.
After reading much and with trail and error I have come up with the ONLY working solution at the moment !
1. Download the toshiba bluetoothstack and install
http://www.csd.toshiba.com/cgi-bin/tais/...47&pf=true
2. Press the sync button on your wiimote ( pressing 1+2 does not work currently !)
3.Connect with toshiba bluetooth stack after connecting lights will still blink.
4. start dolphin
5. go to wiimote icon in dolphin
6. set it to real wiimote
7. press the refresh button ( controller should vibrate )
DO NOT PRESS PAIR UP OR IT DOES NOT WORK !YOU WILL GET THE MESSAGE
[color=#FF4500]A SUPPORTED BLUETOOTH DEVICE WAS NOT FOUND!
(ONLY MICROSOFT BLUETOOTHSTACK IS SUPPORTED)[/color]
Also each time I boot my pc I need to press the sync button on the wiimote in order to sync it with the toshiba BT stack!
Then repeat steps 3 to 7 this is the only fix at the moment !
I had also problems like many I read to get the RVL-CNT-01-TR working in dolphin.
After reading much and with trail and error I have come up with the ONLY working solution at the moment !
1. Download the toshiba bluetoothstack and install
http://www.csd.toshiba.com/cgi-bin/tais/...47&pf=true
2. Press the sync button on your wiimote ( pressing 1+2 does not work currently !)
3.Connect with toshiba bluetooth stack after connecting lights will still blink.
4. start dolphin
5. go to wiimote icon in dolphin
6. set it to real wiimote
7. press the refresh button ( controller should vibrate )
DO NOT PRESS PAIR UP OR IT DOES NOT WORK !YOU WILL GET THE MESSAGE
[color=#FF4500]A SUPPORTED BLUETOOTH DEVICE WAS NOT FOUND!
(ONLY MICROSOFT BLUETOOTHSTACK IS SUPPORTED)[/color]
Also each time I boot my pc I need to press the sync button on the wiimote in order to sync it with the toshiba BT stack!
Then repeat steps 3 to 7 this is the only fix at the moment !