+- Dolphin, the GameCube and Wii emulator - Forums (https://forums.dolphin-emu.org)
+-- Forum: Dolphin Emulator Discussion and Support (https://forums.dolphin-emu.org/Forum-dolphin-emulator-discussion-and-support)
+--- Forum: Controllers (https://forums.dolphin-emu.org/Forum-controllers)
+--- Thread: [Linux] - official wii-u gamecube controller adapter recognized but no controller (/Thread-linux-official-wii-u-gamecube-controller-adapter-recognized-but-no-controller)
[Linux] - official wii-u gamecube controller adapter recognized but no controller - nfr - 08-18-2015
Need some help in this matter. I don't know if it's an faulty adapter or if there are some other issue.
dmesg shows this when the adapter is plugged in
usb 2-1.8: new full-speed USB device number 3 using ehci-pci
usb 2-1.8: New USB device found, idVendor=057e, idProduct=0337
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: Product: WUP-028
usb 2-1.8: Manufacturer: Nintendo
usb 2-1.8: SerialNumber: 15/07/2014
But when I plugin in a controller in the adapter nothing happens. No new devices are detected and nothing in udev either
lsusb displayes the adapter but again no sign of any controller
Bus 002 Device 003: ID 057e:0337 Nintendo Co., Ltd
usb-devices shows the following
T: Bus=02 Lev=02 Prnt=02 Port=07 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=057e ProdID=0337 Rev=01.00
S: Manufacturer=Nintendo
S: Product=WUP-028
S: SerialNumber=15/07/2014
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
So the question is, should a new device occur for each controller inserted in the adapter?
Could someone with a working setup show how lsusb and usb-devices identify the adapter/controllers.
Any help would be appriciated