+- Dolphin, the GameCube and Wii emulator - Forums (https://forums.dolphin-emu.org)
+-- Forum: Dolphin Emulator Discussion and Support (https://forums.dolphin-emu.org/Forum-dolphin-emulator-discussion-and-support)
+--- Forum: Support (https://forums.dolphin-emu.org/Forum-support)
+--- Thread: Multiple X360 Pads as GC pads (/Thread-multiple-x360-pads-as-gc-pads)
Multiple X360 Pads as GC pads - BassSick - 08-18-2009
We were trying to play some mario party last night, but the x360 pad plug-in does not recognize more than 1 pad.
I have an Xbox 360 Wireless reciever for windows, and sync 4 pads with it.
Tried Xpadder, but there's not that many keys on a single keyboard! Some keys overlaps with Dolphin's functions, and configuration is not always perfect.
Any word on this?
RE: Multiple X360 Pads as GC pads - CacoFFF - 08-18-2009
Have you tried using nJoy?
RE: Multiple X360 Pads as GC pads - BassSick - 08-18-2009
nJoy always maps to A+0 or A-0
RE: Multiple X360 Pads as GC pads - CacoFFF - 08-18-2009
You are using nJoy 0.4 then, have you tried 0.3?
If none of both map your axis correctly, you can manually edit the config file and specify the axes yourself.
RE: Multiple X360 Pads as GC pads - shuffle2 - 08-18-2009
hm, this _should_ work fine, but i've never tested with wireless pads :p
you have to connect all pads and then start up dolphin, it only scans once. Then the connected pads _should_ appear in the drop-down list of the x360 pad plug-in.
RE: Multiple X360 Pads as GC pads - BassSick - 08-18-2009
It's definitely not working with more than 1 wireless pad (only number 1 appears in the drop-down list), and njoy 0.3 keeps mapping to A+0 and A-0 too :S
RE: Multiple X360 Pads as GC pads - CacoFFF - 08-19-2009
nJoy sometimes failed in some revisions to detect axes in the config dialog but always worked ingame, post a pic of P1 config using nJoy.
And the nJoy.ini as well.
It shouldn't be so different to configure as any Dual analog game pad.
Since you have 4 xbox 360 controllers, manually setting player 1 and then copying those settings to p2,p3,p4 should work perfectly.
nJoy 0.3 and 0.4 save the config differently, so remember to tell which version you use.
EDIT: Say, the nJoy drop-down list only shows one of the wireless pads?
Does the control panel show 1 master pad (probably the wireless receiver) or 4 individual ones?