+- Dolphin, the GameCube and Wii emulator - Forums (https://forums.dolphin-emu.org)
+-- Forum: Dolphin Emulator Discussion and Support (https://forums.dolphin-emu.org/Forum-dolphin-emulator-discussion-and-support)
+--- Forum: Controllers (https://forums.dolphin-emu.org/Forum-controllers)
+--- Thread: XBOX 360 Controller Setup on Dolphin for newbs (/Thread-xbox-360-controller-setup-on-dolphin-for-newbs)
RE: XBOX 360 Controller Setup on Dolphin for newbs - vinyldj - 01-19-2011
thanks this got my wirekess 360 controller set-up - game tested luigi's mansion.
regards.
(03-27-2010, 06:37 AM)flukeSG2 Wrote: Ok, I just downlaoded Dolphin yesterday and I got both my wireless 360 and wired to both work. Here is what I did.
1. I inactivated the Wiimotes, under the Wiimote tab.
2. GC Pad tab, if you are mapping your first controller make sure it's on Gamecube Pad 1 tab, from the drop down select which controller it is you are going to map.
3. I had some issues with the analog sticks, move them around to make sure they are properly working in all x and y positions. My Analog 2 gave me the most problems. I had to click the button next to "Right X-Axis" a few times until it came up with the number "4" and the "Right Y-Axis" then turned to number "3". You may have varying degree's of success with this, use whatever numbers work for you, I won't guarantee those 2 settings for me will work for you.
4. Left Trigger and Right Trigger, click the buttons and squeeze according triggers, again my settings came to Left Trigger "1000" and Right Trigger "1001"
5. Mapping your Buttons and D-Pad, pretty self explanatory, the GC uses ABXY just like xbox, makes it simple. for the Z button I used the "back" button.
6. Main Stick, drop down menu select analog 1. At the bottom you see "Semi" click the button and press down on your analog 1 stick, to assign it.
7. C-Stick, drop down menu select analog 2, again on the "Semi" button press down on the Analog 2 stick to assign it.
8. Triggers, drop down menu select triggers. Now I tried to assign the L and R buttons to my triggers to no success. HOWEVER, they still work, I believe because we've mapped them above already in the "Analog Axes and Trigger" area. The Semi-L should be your LB button and the Semi-R your RB button on your controller.
P.S. I just realized for games like Super Mario Galaxy, you will have to enable the Wiimotes and map the keys in that area, as that game requires the Wiimote.
That is what I did and I have full control using my Xbox 360 Controller.
Let me know if this helps at all.
RE: XBOX 360 Controller Setup on Dolphin for newbs - meeraaaa - 07-07-2011
Ok, so i did all the configuration to play with my xbox360 wired controller, and the game starts, when the game prompts press 2 to start, i hit start on my controller and it gives me
" P1
This extension controller is not supported.
Please remove the extension controller. "
![[Image: 35mmzp3.jpg]](http://i53.tinypic.com/35mmzp3.jpg)
![[Image: iom92o.jpg]](http://i55.tinypic.com/iom92o.jpg)
RE: XBOX 360 Controller Setup on Dolphin for newbs - Billiard26 - 07-07-2011
meeraaaa, That game uses wiimotes, not gamecube controllers..
RE: XBOX 360 Controller Setup on Dolphin for newbs - meeraaaa - 07-07-2011
Yes, i'm sorry i did the wrong screen capture.
It doesnt work anyways
watch this http://www.youtube.com/watch?v=wsTLhWsSdac
RE: XBOX 360 Controller Setup on Dolphin for newbs - Anti-Ultimate - 07-07-2011
Use a newer Version ?
RE: XBOX 360 Controller Setup on Dolphin for newbs - Duke Nukem - 07-07-2011
(07-07-2011, 07:00 PM)Anti-Ultimate Wrote: Use a newer Version ?
Yeah why use an ancient build like that when there is better ones.
meeraaaa are you sure you have installed the XBOX 360 controller drivers and made sure it's displayed in the list of controller outputs under emulated Wii mote settings?
RE: XBOX 360 Controller Setup on Dolphin for newbs - meeraaaa - 07-09-2011
Thank you so much,
indeed, you were both right, it was that ancient build's problem.
i downloaded 7671version and it works gr8, the fps is killing a bit.
But i finally get to play the game.
Thanks a lot
RE: XBOX 360 Controller Setup on Dolphin for newbs - Duke Nukem - 07-09-2011
That's great to hear.
There can't be a good enough reason to still be on those kind of builds.
RE: XBOX 360 Controller Setup on Dolphin for newbs - Spaz_095 - 01-31-2012
When I plugged in the xbox controller, it said it downloaded the driver, but when it won't show up in the controller list for Dolphin.
RE: XBOX 360 Controller Setup on Dolphin for newbs - Ashman23 - 02-01-2012
It should show us as xinput/x/Gamepad if you click on the drop down arrow for device.