+- Dolphin, the GameCube and Wii emulator - Forums (https://forums.dolphin-emu.org)
+-- Forum: Dolphin Emulator Discussion and Support (https://forums.dolphin-emu.org/Forum-dolphin-emulator-discussion-and-support)
+--- Forum: Controllers (https://forums.dolphin-emu.org/Forum-controllers)
+--- Thread: Hey setting up calibration on a xbox controller. (/Thread-hey-setting-up-calibration-on-a-xbox-controller)
RE: Hey setting up calibration on a xbox controller. - KHg8m3r - 02-16-2014
Not really, cause if you're using my profile, I already know what's there
I asked for the config and graphics tab to see if there's something else going on in Dolphin that's causing an issue
RE: Hey setting up calibration on a xbox controller. - sinned1 - 02-16-2014
(02-16-2014, 03:04 AM)KHg8m3r Wrote: Post pics of your config and graphics tabs
Display Devices
---------------
Card name: AMD Radeon HD 7800 Series
Manufacturer: Advanced Micro Devices, Inc.
Chip type: AMD Radeon Graphics Processor (0x6819)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_6819&SUBSYS_32611682&REV_00
Display Memory: 4095 MB
Dedicated Memory: 2030 MB
Shared Memory: 2065 MB
Current Mode: 1360 x 768 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: ZORAN MATRIX
Monitor Id: ZRN0302
Native Mode: 1360 x 768(p) (60.015Hz)
Output Type: HDMI
Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1247 (English)
Driver Version: 13.251.0.0
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 12/6/2013 16:01:52, 1318552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-2B59-11CF-ED71-6B12BEC2C535}
Vendor ID: 0x1002
Device ID: 0x6819
SubSys ID: 0x32611682
Revision ID: 0x0000
Driver Strong Name: oem23.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_R575B:13.251.0.0:pci\ven_1002&dev_6819
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
I dxdiaged the graphics because copying and pasting is easier. Now I will try to do the sharing of my config. Hey it wont let me attach the config file here. But I DO HAVE a picture here you go
http://share.pho.to/4lHL0
RE: Hey setting up calibration on a xbox controller. - KHg8m3r - 02-16-2014
I mean the graphics and config tabs from Dolphin. The ones to the left of the GC pad setup button.
Well, you are running the latest drivers for your card....
RE: Hey setting up calibration on a xbox controller. - sinned1 - 02-16-2014
Config
http://share.pho.to/4lLRD
http://share.pho.to/4lLSV
http://share.pho.to/4lLUM
http://share.pho.to/4lLV8
http://share.pho.to/4lLVo
http://share.pho.to/4lLWi
GFX
http://share.pho.to/4lLXm
http://share.pho.to/4lLYS
http://share.pho.to/4lLYj
http://share.pho.to/4lLZX
RE: Hey setting up calibration on a xbox controller. - KHg8m3r - 02-17-2014
Well first off, you might want to set a memory card to slot A under config>gamecube
Everything else looks fine (you may want to turn Disable fog off just to be sure. If not, go ahead and turn it back on)
RE: Hey setting up calibration on a xbox controller. - sinned1 - 02-17-2014
(02-17-2014, 01:18 AM)KHg8m3r Wrote: Well first off, you might want to set a memory card to slot A under config>gamecube
Everything else looks fine (you may want to turn Disable fog off just to be sure. If not, go ahead and turn it back on)
I have that as the global melee netplay rules and I think it would screw up a lot of things if I left it on here I'll show you the rules.http://smashboards.com/threads/dolphin-online-melee-netplay.335432/ when o first did this my dolphin would crash all the time but i fixed it
RE: Hey setting up calibration on a xbox controller. - KHg8m3r - 02-17-2014
Ok, as long as you know about that.
Is it still giving problems?
RE: Hey setting up calibration on a xbox controller. - sinned1 - 02-17-2014
(02-17-2014, 08:48 AM)KHg8m3r Wrote: Ok, as long as you know about that.
Is it still giving problems?
Controller is the only problem =(
RE: Hey setting up calibration on a xbox controller. - KHg8m3r - 02-17-2014
And you already did the joy.cpl thing to calibrate.
RE: Hey setting up calibration on a xbox controller. - sinned1 - 02-17-2014
(02-17-2014, 01:57 PM)KHg8m3r Wrote: And you already did the joy.cpl thing to calibrate.
Yes and I put it in the gcpad folder That didnt work I also named it joy.INI and joy.cpl.ini and none worked