+- Dolphin, the GameCube and Wii emulator - Forums (https://forums.dolphin-emu.org)
+-- Forum: Dolphin Emulator Discussion and Support (https://forums.dolphin-emu.org/Forum-dolphin-emulator-discussion-and-support)
+--- Forum: Controllers (https://forums.dolphin-emu.org/Forum-controllers)
+--- Thread: Mayflash GC Adapter Problem (/Thread-mayflash-gc-adapter-problem)
Mayflash GC Adapter Problem - yl-smash - 01-11-2014
I just received my adapter today after a long wait, and I am having difficulty. I installed the correct driver, and I plugged my controller into port 1 (left) and it is working fine. However when I plugged in another controller to port 2 (right) I am having problems. Everything on port 2 seems to work except the control stick, (playing smash bros brawl) I can only walk, not run. The stick does not give the full effect; it is as if it is inputting half of the command. In the dolphin gcpad settings it shows that the stick is going completely in the desired direction yet in game it does not function fully. I have tried using a different controller and different settings. Is there something I can do? Is my adapter defective? Is there any workaround? Help would be much appreciated.
On a side note, ever since I got this thing dolphin crashes when I stop emulating a game (pressing esc, closing out the page, emulation->stop).
EDIT: I turned the radius up to 100 and that solved the problem. Still don't know why dolphin is crashing. I can live with it, but it's very annoying.
RE: Mayflash GC Adapter Problem - Billiard26 - 01-11-2014
Show a screenshot of your gcpad config.
RE: Mayflash GC Adapter Problem - yl-smash - 01-11-2014
http://puu.sh/6gIn0.png (port 1) http://puu.sh/6gIop.png (port 2)
dolphin revision 4.0-648 btw
RE: Mayflash GC Adapter Problem - Billiard26 - 01-11-2014
Take a screenshot while your main stick is to the far right.
RE: Mayflash GC Adapter Problem - JMC47 - 01-11-2014
Edit: Assuming it's not dropped inputs, turn up the radius to 100 on cstick and control stick
It's a problem with the cheapass mayflash. If you really are using both controllers hardcore, it'll simply drop inputs. Everyone I know who uses it has problems with this.
RE: Mayflash GC Adapter Problem - yl-smash - 01-11-2014
Turning the radius up to 100 fixed it! Thank you JMC. Billiard if you wanted the screenshot anyways here it is. http://puu.sh/6gLJj.png
Now that that is resolved, anyone know why dolphin crashes after ending an emulation? Using the Mayflash adapter is the only thing that could have done it. I have never have problems with dolphin until then. This problem is consistent using 4.0-648 and 4.0.