Dolphin, the GameCube and Wii emulator - Forums

Full Version: Bluetooth passthrough won't connect.
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

xXRoboBoyXx

The only build of dolphin that seemed to work was 5.0-1156-dirty. but it won't connect to the wii remote for more then a second, not accepting any input.
but others (5.0-8344 5.0-8695 5.0-8715  give the error message "Bluetooth passthrough mode is enabled, but no usable Bluetooth Usb device was found. Aborting."

The bluetooth adapter i'm using,
Intel® Wireless Bluetooth® 4.0 VID:8087 PID: 07DC REV:0001

Things i've tried:

Installing UsbDk, but that didn't work, so i uninstalled it.
Forcing the adapter to be used, Didn't work.
Using the WinUsb driver in zadig, didn't work.

I've gotten all these errors at one point or another, i can't remember exactly when.
"couldn't initialize libusb for bluetooth passthrough: LIBUSB_ERROR_NOT_FOUND"
"failed to open bluetooth device dolphin libusb_error_other"
"an "IPCEVENT" was scegualed from the wrong thread (non cpu)"

The specs of my computer:
Processor:Intel Core i7 4700MQ
Memory:12GB DDR3 3391 MHz
Graphics card:Intel HD 4600
OS:Windows 10

If i need to give more info, please let me know, i'll do my best to provide it.

alucard971

(09-07-2018, 02:31 AM)xXRoboBoyXx Wrote: [ -> ]The only build of dolphin that seemed to work was 5.0-1156-dirty. but it won't connect to the wii remote for more then a second, not accepting any input.
but others (5.0-8344 5.0-8695 5.0-8715  give the error message "Bluetooth passthrough mode is enabled, but no usable Bluetooth Usb device was found. Aborting."

The bluetooth adapter i'm using,
Intel® Wireless Bluetooth® 4.0 VID:8087 PID: 07DC REV:0001

Things i've tried:

Installing UsbDk, but that didn't work, so i uninstalled it.
Forcing the adapter to be used, Didn't work.
Using the WinUsb driver in zadig, didn't work.

I've gotten all these errors at one point or another, i can't remember exactly when.
"couldn't initialize libusb for bluetooth passthrough: LIBUSB_ERROR_NOT_FOUND"
"failed to open bluetooth device dolphin libusb_error_other"
"an "IPCEVENT" was scegualed from the wrong thread (non cpu)"

The specs of my computer:
Processor:Intel Core i7 4700MQ
Memory:12GB DDR3 3391 MHz
Graphics card:Intel HD 4600
OS:Windows 10

If i need to give more info, please let me know, i'll do my best to provide it.

For the LUBUSB ERROR NOT FOUND bit, I would try reinstalling libusb as specified on the wiki. Check in the "Troubleshooting" section at the bottom, then go up to the "Setup - Windows" section for the download. https://wiki.dolphin-emu.org/index.php?t...assthrough

For the IPC EVENT,I had the same issue. Use this build instead for now. https://forums.dolphin-emu.org/Thread-bl...leshooting