Dolphin, the GameCube and Wii emulator - Forums

Thanks Jhonn. I had a little poke around and found this:

The actual circuit looks something like this:

Quote:/---/--------------(+)
|   \D7-D8-D9-------/--(-) 
D6--------------D10/

Where D6 and D10 are the working lights, and D7,8 and 9 which are on a separate branch are out. The situation is exactly the same on the right-hand side.

Checking the voltages, D6 and D10 show a steady 1.3volts D7,8,9 are all over the place, but in the mV range. None of them are reading 0. I don't really know what that could mean though.
 
If D7 has blown, would that prevent D8 and D9 from working?
If D8 has blown, would that prevent D7 and D9 from working?

(01-25-2015, 07:18 PM)Tomkun Wrote: [ -> ]If D7 has blown, would that prevent D8 and D9 from working?
If D8 has blown, would that prevent D7 and D9 from working?

Yes, because they're connected in series. I'm out of ideas now, this confirms the voltage regulators are working as they should, so, the last resort is replacing the IR LEDs...