Pages: 1 2 3 4 5 6 7 8 9 10 11 12
Hello people !
This is my first post in Dolphin Forum.
Specs/config at the time of dolphin benchmark:
-> Intel Core i3 4150 3.5 GHz (EIST, C State and HT all disabled)
-> Asus B85M-G Motherboard, Bios ver. 2501
-> 2 x 2GB DDR3 1600 MHz 8-9-8-25-1T 1.65v
-> Windows 8.1 x64
-> Intel Graphics Driver Version 15.36.24.64.4264 (10 August 2015)
[
attachment=13940]
Intel G3258 @4.0ghz (EIST, C state all enabled)
MSI H81M-p33 motherboard
2x4gb DDR3 1600mhz (running @1400mhz)
Windows 8.1 x64
Nvidia 750ti
score = 4mins 57sec
*edit: very happy with this budget chip, surprised it can score under 5:00, and the same as morgoth32's i7 5960x @ 4 Ghz (we both got 4mins 57sec).
Hii.. All..
AMD Athlon ii x2 250 3.01ghz @3671mhz
GA-78LMT-S2P
2x2gb Kvr1333
Windows 7 Ultimate 64 bit
Nvidia Geforce 9800 GTX+
i5-4690k
bx200 ssd
16 gb of 1600mhz ram oced to 2133
gtx 960 g1 gaming 4gb
![[Image: tcYdV3f.jpg]](http://i.imgur.com/tcYdV3f.jpg)
Runs Star Wars Rogue Leader and Rebel Strike pretty well at 1080p w/ 4xAA and 16xAF.
Mine is pretty exotic setup:
Intel Xeon X5492 Quad Core @ 3.4 Ghz (stock speed) LGA 771 to 775 MOD (12M Cache, 3.40 GHz, 1600 MHz FSB)
Nvidia GTX 760
(2 x 4Gb) Crucial Ballistix Sport DDR3-1600
Win7 x64
Total time - 10 min 15 sec
Times are quite consistent: from 10:00 to 10:15. CPU is at constant ~50% load during the bench. Fan is quiet.
Interesting fact:
Intel Core i5-2450M 2.4GHz in my DELL Inspiron N5110 with shows exactly the same results (10 min 10 sec).
Cinebench R15 score:
Intel Xeon X5492 - 376;
Core i5-2450M - 245.
Something went wrong with screencapture. Instead of capturing the final results, it gave me the developer credits.
I remember the benchmark:
40 seconds
3 minutes and 57 seconds
4 minutes and 38 seconds on the system below
i7 4790K 4.4 Ghz HT
12 GB DDR3 1600 Mhz
Nvidia GTX660
Windows 10 x64
I5 6600K @ 4.4ghz - DDR4 3200 - Win10
Parse time: 1 seconds
Photon time: 35 seconds
Render time: 3 minutes 19 seconds
Total time: 3 minutes 55 seconds
But if i try to use a newer dolphin.exe with the exact same settings, the result is about 3x or 4x this result! ...?
Pages: 1 2 3 4 5 6 7 8 9 10 11 12