Dolphin, the GameCube and Wii emulator - Forums

Not really, cause if you're using my profile, I already know what's there

I asked for the config and graphics tab to see if there's something else going on in Dolphin that's causing an issue

(02-16-2014, 03:04 AM)KHg8m3r Wrote: [ -> ]Post pics of your config and graphics tabs

Display Devices
---------------
Card name: AMD Radeon HD 7800 Series
Manufacturer: Advanced Micro Devices, Inc.
Chip type: AMD Radeon Graphics Processor (0x6819)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_6819&SUBSYS_32611682&REV_00
Display Memory: 4095 MB
Dedicated Memory: 2030 MB
Shared Memory: 2065 MB
Current Mode: 1360 x 768 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: ZORAN MATRIX
Monitor Id: ZRN0302
Native Mode: 1360 x 768(p) (60.015Hz)
Output Type: HDMI
Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1247 (English)
Driver Version: 13.251.0.0
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 12/6/2013 16:01:52, 1318552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-2B59-11CF-ED71-6B12BEC2C535}
Vendor ID: 0x1002
Device ID: 0x6819
SubSys ID: 0x32611682
Revision ID: 0x0000
Driver Strong Name: oem23.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_R575B:13.251.0.0:pci\ven_1002&dev_6819
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled




I dxdiaged the graphics because copying and pasting is easier. Now I will try to do the sharing of my config. Hey it wont let me attach the config file here. But I DO HAVE a picture here you go
http://share.pho.to/4lHL0

I mean the graphics and config tabs from Dolphin. The ones to the left of the GC pad setup button.

Well, you are running the latest drivers for your card....

Config
http://share.pho.to/4lLRD
http://share.pho.to/4lLSV
http://share.pho.to/4lLUM
http://share.pho.to/4lLV8
http://share.pho.to/4lLVo
http://share.pho.to/4lLWi

GFX
http://share.pho.to/4lLXm
http://share.pho.to/4lLYS
http://share.pho.to/4lLYj
http://share.pho.to/4lLZX

Well first off, you might want to set a memory card to slot A under config>gamecube

Everything else looks fine (you may want to turn Disable fog off just to be sure. If not, go ahead and turn it back on)

(02-17-2014, 01:18 AM)KHg8m3r Wrote: [ -> ]Well first off, you might want to set a memory card to slot A under config>gamecube

Everything else looks fine (you may want to turn Disable fog off just to be sure. If not, go ahead and turn it back on)

I have that as the global melee netplay rules and I think it would screw up a lot of things if I left it on here I'll show you the rules.http://smashboards.com/threads/dolphin-online-melee-netplay.335432/ when o first did this my dolphin would crash all the time but i fixed it

Ok, as long as you know about that.

Is it still giving problems?

(02-17-2014, 08:48 AM)KHg8m3r Wrote: [ -> ]Ok, as long as you know about that.

Is it still giving problems?

Controller is the only problem =(

And you already did the joy.cpl thing to calibrate.

(02-17-2014, 01:57 PM)KHg8m3r Wrote: [ -> ]And you already did the joy.cpl thing to calibrate.

Yes and I put it in the gcpad folder That didnt work I also named it joy.INI and joy.cpl.ini and none worked