So here are my specs
1. RAM - 16.0 GB Dual-Channel DDR3.
2. Motherboard - MSI Z77A-G43 (MS-7758).
3. Processor - Intel Core i5 2500K @ 3.30GHz.
4. Graphics - GeForce GTX 580.
5. Operating system - Windows 7 Home Premium 64-bit
okay so can any one tell which are the best settings ?
Direct3D11, i also could have openGL but i dont know which to choose
V-sync
Aspect ratio - 1366x768 ( the size of my monitor )
4x native 2560x2112
Anti-aliasing - 8 samples ( I don't know much about it so I went with 8) Anisotropic filtering - 16x
Scaled EFB copy
If someone could help me i'd deeply appreciate it
(09-02-2012, 12:01 PM)mellowninja Wrote: [ -> ]So here are my specs
1. RAM - 16.0 GB Dual-Channel DDR3.
2. Motherboard - MSI Z77A-G43 (MS-7758).
3. Processor - Intel Core i5 2500K @ 3.30GHz.
4. Graphics - GeForce GTX 580.
5. Operating system - Windows 7 Home Premium 64-bit
okay so can any one tell which are the best settings ?
Direct3D11, i also could have openGL but i dont know which to choose
V-sync
Aspect ratio - 1366x768 ( the size of my monitor )
4x native 2560x2112
Anti-aliasing - 8 samples ( I don't know much about it so I went with 8) Anisotropic filtering - 16x
Scaled EFB copy
If someone could help me i'd deeply appreciate it
That's pretty much as high as you can go.
Thanks for the quick reply but there is also 8 samples quality level 32 which is the top. will my rig be able to do that?
(09-02-2012, 12:05 PM)mellowninja Wrote: [ -> ]Thanks for the quick reply but there is also 8 samples quality level 32 which is the top. will my rig be able to do that?
Try it and find out.
Can't say for sure.
(09-02-2012, 12:02 PM)werewolfyman Wrote: [ -> ] (09-02-2012, 12:01 PM)mellowninja Wrote: [ -> ]So here are my specs
1. RAM - 16.0 GB Dual-Channel DDR3.
2. Motherboard - MSI Z77A-G43 (MS-7758).
3. Processor - Intel Core i5 2500K @ 3.30GHz.
4. Graphics - GeForce GTX 580.
5. Operating system - Windows 7 Home Premium 64-bit
okay so can any one tell which are the best settings ?
Direct3D11, i also could have openGL but i dont know which to choose
V-sync
Aspect ratio - 1366x768 ( the size of my monitor )
4x native 2560x2112
Anti-aliasing - 8 samples ( I don't know much about it so I went with 8) Anisotropic filtering - 16x
Scaled EFB copy
If someone could help me i'd deeply appreciate it
That's pretty much as high as you can go.
(09-02-2012, 12:07 PM)werewolfyman Wrote: [ -> ] (09-02-2012, 12:05 PM)mellowninja Wrote: [ -> ]Thanks for the quick reply but there is also 8 samples quality level 32 which is the top. will my rig be able to do that?
Try it and find out.
Can't say for sure.
Alright thanks also i've seen a couple of thread saying the emulator isn't graphics card dependant as the CPU is that right ? also is mine alright ?
(08-31-2012, 07:50 PM)admin89 Wrote: [ -> ]Even the most powerful GPU - Nvidia GTX 690 can not max out everything...(4xIR , 9x SSAA)
Highest Settings on Dolphin is impossible atm
Quote:1366x768 ( the size of my monitor )
3x IR + 4x SSAA may be alittle too high for Nvidia GTX 580 , I'm not so sure
But i'm sure 4X IR + 8X SSAA is not possible
He's using MSAA. It should be able to handle 3x IR + 4xSSAA like a champ. It will probably struggle with 4x IR + 8xMSAA in some games. I would consider lowering that to either 4x IR + 4x MSAA or 3x IR + 8x MSAA.
@OP: You could overclock your CPU to 4.4GHz. So you're able to play the demanding games with LLE (SMG1+2) just fine. Just a little hint
(09-02-2012, 06:09 PM)DefenderX Wrote: [ -> ]@OP: You could overclock your CPU to 4.4GHz. So you're able to play the demanding games with LLE (SMG1+2) just fine. Just a little hint
Alright thanks for the tips but i've put all of them to the top and i still get around 100% speed on skyward sword.
Also i dont think i can overclock atm, my whole rig runs a little hot so i'm getting extra fans to ventilate the heat.
Also enable efb copies to ram and "enable cache".
Its needed for a lot of games to work properly.
I dont know about zelda but for some games you will need to ease up on AA even on 580