Dolphin, the GameCube and Wii emulator - Forums

I tried to play Zelda SS but I can´t move the wii cursor (with the mouse) over the complete screen. Right and left almost 1/3 that i can´t reach because the cursor stops and didn´t move but the mouse cursor hasn´t reached the end of my screen.....need help
Has it someone to do with my display resolution of 1440x900?

Woop, thanks for this, now I just have to configure it..

please aulis2 please post again to your configuration for keyboard mouse.. i cannot see it either in pictures
please friend

(12-09-2011, 04:53 AM)THATAWESOMEGUY Wrote: [ -> ]please aulis2 please post again to your configuration for keyboard mouse.. i cannot see it either in pictures
please friend

Here they are, i uploaded them into tinypic, just in case.

Wiimote
Nunchuk

(12-09-2011, 05:11 AM)Promised_Pain Wrote: [ -> ]

(12-09-2011, 04:53 AM)THATAWESOMEGUY Wrote: [ -> ]please aulis2 please post again to your configuration for keyboard mouse.. i cannot see it either in pictures
please friend

Here they are, i uploaded them into tinypic, just in case.

Wiimote
Nunchuk

HERE IS MY KEYBOAR MOUSE CONFIG...THANKS GUYS FOR TEST IT...

(12-08-2011, 06:33 PM)natbad Wrote: [ -> ]

(12-08-2011, 05:56 PM)Kakkoii Wrote: [ -> ]

(12-08-2011, 03:20 PM)natbad Wrote: [ -> ]

(12-08-2011, 03:10 PM)aulis2 Wrote: [ -> ]

(12-08-2011, 03:06 PM)natbad Wrote: [ -> ]I dled the latest 64bit build off the site and then have tried overwriting it with various builds in the OP, most recently the one you suggested.

reinstall dolphin 3.0 of the oficial page...

use last build 12/7 j peterson textcache rewriter...


use my keyboard and mouse settings and tell me afther that if it is working

dont replace or rename textcache rewriter..only put it in the folder..and open it..

Nope =/ I started fresh and still same issue.

I'm having a similar issue. But I think I found the cause, in a way.

If I just download stock Dolphin, and add the peterson files, then launch the game, it works and calibrates the motion+. But if I go and change any of my control settings, it breaks it for some reason, and will no longer go past the motion+ screen.

The existence of the WiimoteNew.ini file in the User\Config\ folder seems stops motion+ from working for some reason. I don't get this, customizing your controls shouldn't matter. Even if you don't change anything and just hit apply, the fact that config file is there screws it up.

Here's the build with the Peterson files that works for me, nothing needs to be done on others parts:
http://www.mediafire.com/?7ch4tj38s7vi1ad

Now if only someone could explain the custom controls problem breaking it -_-.

(Also, the cursor moves around fine during calbiration, keeping on track with my computer cursor. But when I get to the next menu with the save location and naming, the cursor liks to float around and not follow along well... Can't reach anywhere near the sides of the screen)

Indeed you are correct. I simply deleted WiimoteNew.ini and it worked. Thanks for the info.

Well this is wonderful isn't it... screwed either way until this gets worked out, lol.

Bump for any ideas on this issue.

Hi everyone, i've got some problems playing Zelda SS. Actually i followed all the instructions in this guide (and tried a lot of different configs) but i still can't pass through the first screen (connect the motion plus blah blah ...). Am i doing something wrong ?

(12-09-2011, 05:54 AM)Freakazoid Wrote: [ -> ]Hi everyone, i've got some problems playing Zelda SS. Actually i followed all the instructions in this guide (and tried a lot of different configs) but i still can't pass through the first screen (connect the motion plus blah blah ...). Am i doing something wrong ?

use last build of john peterson..it is here:

http://www.mediafire.com/?eta17d97uw4m4

paste it in your dolphin folder..

and use my config is up in this post..

(12-09-2011, 06:04 AM)aulis2 Wrote: [ -> ]

(12-09-2011, 05:54 AM)Freakazoid Wrote: [ -> ]Hi everyone, i've got some problems playing Zelda SS. Actually i followed all the instructions in this guide (and tried a lot of different configs) but i still can't pass through the first screen (connect the motion plus blah blah ...). Am i doing something wrong ?

use last build of john peterson..it is here:

http://www.mediafire.com/?eta17d97uw4m4

paste it in your dolphin folder..

and use my config is up in this post..

I've tried using your config, but when I open my SS, Dolphin isn't reading any input. I can't get past the screen where it says "move pointer to the middle of the screen and press A", or whatever. What do I do?

(12-09-2011, 06:08 AM)epiklamp Wrote: [ -> ]

(12-09-2011, 06:04 AM)aulis2 Wrote: [ -> ]

(12-09-2011, 05:54 AM)Freakazoid Wrote: [ -> ]Hi everyone, i've got some problems playing Zelda SS. Actually i followed all the instructions in this guide (and tried a lot of different configs) but i still can't pass through the first screen (connect the motion plus blah blah ...). Am i doing something wrong ?

use last build of john peterson..it is here:

http://www.mediafire.com/?eta17d97uw4m4

paste it in your dolphin folder..

and use my config is up in this post..

I've tried using your config, but when I open my SS, Dolphin isn't reading any input. I can't get past the screen where it says "move pointer to the middle of the screen and press A", or whatever. What do I do?

you hav too see your wii mote confi...and see everything looks like mine..

---

(12-09-2011, 06:18 AM)aulis2 Wrote: [ -> ]

(12-09-2011, 06:08 AM)epiklamp Wrote: [ -> ]

(12-09-2011, 06:04 AM)aulis2 Wrote: [ -> ]

(12-09-2011, 05:54 AM)Freakazoid Wrote: [ -> ]Hi everyone, i've got some problems playing Zelda SS. Actually i followed all the instructions in this guide (and tried a lot of different configs) but i still can't pass through the first screen (connect the motion plus blah blah ...). Am i doing something wrong ?

use last build of john peterson..it is here:

http://www.mediafire.com/?eta17d97uw4m4

paste it in your dolphin folder..

and use my config is up in this post..

I've tried using your config, but when I open my SS, Dolphin isn't reading any input. I can't get past the screen where it says "move pointer to the middle of the screen and press A", or whatever. What do I do?

you hav too see your wii mote confi...and see everything looks like mine..

waht windows do you have--? 64 bytes? or x86 bytes?..i ca upload my dolphin with all configurated..