open the 2 remotes, take out the LEDs, and put them in two holes in something (about 20 cm apart). Connect the +ve end of one LED to the -end of the other with a wire. Connect the red wire out of a USB cable to the positive end of one of the two LEDs (the one with nothing attached to its +ve end). Connect a resistor (about 90 ohms) to the -ve end which isn't being used. Connect the other end of the resistor to the black wire from inside the USB cable.
Then plug it in, and look at it through a digital camera. You should see both LEDs light up. If when you point a Wiimote at it it doesn't have a working cursor, then the LEDs are probably too dim, and you need two (or four) more LEDs on each side (which will mean you'll need a weaker resistor).
Then plug it in, and look at it through a digital camera. You should see both LEDs light up. If when you point a Wiimote at it it doesn't have a working cursor, then the LEDs are probably too dim, and you need two (or four) more LEDs on each side (which will mean you'll need a weaker resistor).
OS: Windows 10 64 bit Professional
CPU: AMD Ryzen 5900X
RAM: 16GB
GPU: Radeon Vega 56
CPU: AMD Ryzen 5900X
RAM: 16GB
GPU: Radeon Vega 56
