[Wii] Wiimote mapping bug

[Megidolaon]

I have considerable trouble mapping any sort of input device (that isn't a real wiimote) to proper Wiimote controls.

The problem is the same for pc gamepad, keyboard and mouse. The sensitivity is so high that I have practically only 2 positions, one at the center and one at the end of the range.
No matter how slightly I move the analog stick, mouse or a key, in an instant the cursor moves to the end of the screen.

And also if I use the the cursor jumps back to the screen center after about half a second, it is not possible to keep it in the same position.
If I use a gamepad, the cursor jumps back the instant I let go of the analog stick.

Obviously this means any game using the wiimote normally and not the d-pad or a classic controller is unplayable.

If this is a side effect of making real wiimotes work, can you just check which input device is selected and change it accordingly?

[Billiard26]

"And also if I use the the cursor jumps back to the screen center after about half a second, it is not possible to keep it in the same position.
If I use a gamepad, the cursor jumps back the instant I let go of the analog stick."

Caused by lack of a feature: https://code.google.com/p/dolphin-emu/issues/detail?id=3033

You haven't described your other issue well enough to comment on.

[Megidolaon]

When I don't touch anything, the cursor is in the center. When I move it to any direction with the keyboard or a gamepad, it moves to the edge of the screen (depending Dead Zone) almost instantly, the slightest input moves it to the edge.
It does not directly skip the space inbetween, but traverses it so fast that it's impossible to stop anywhere else on the screen.

[Billiard26]

Try explaining again without using any pronouns.

[Megidolaon]

...the what now?

[Billiard26]

We'll just assume you're describing a lack of this feature. :p https://code.google.com/p/dolphin-emu/issues/detail?id=3033