[Wii] Tales of Symphonia: Dawn of the New World

[totilio]

Hello! I'm trying to play this game, problem is it has some sound issues. I`ve used 3.xxx versions and they had audio lag during cutscenes, and 4.0-xxx versions had probles with background music (but voices and stuff during skits were ok).
The game itself has a good speed (40-60fps).
Here`s my config:


http://imgur.com/nDmkkzH

and here is my specs:

Operating System:Windows 7 Utimate x64Processor/CPU:AMD Athlon 64 X2 Dual Core Processor 5000+ 2.60 GHzVideo Card/GPU:ATI Radeon HD 6670Memory/RAM:8Gb

Is there a way to fix this? Thanks in advance

[domjam]

(10-06-2013, 05:31 AM)totilio Wrote: Hello! I'm trying to play this game, problem is it has some sound issues. I`ve used 3.xxx versions and they had audio lag during cutscenes, and 4.0-xxx versions had probles with background music (but voices and stuff during skits were ok).
The game itself has a good speed (40-60fps).
Here`s my config:


http://imgur.com/nDmkkzH

and here is my specs:

Operating System:Windows 7 Utimate x64Processor/CPU:AMD Athlon 64 X2 Dual Core Processor 5000+ 2.60 GHzVideo Card/GPU:ATI Radeon HD 6670Memory/RAM:8Gb

Is there a way to fix this? Thanks in advance

your cpu is your problem

[LordVador]

(10-07-2013, 07:54 AM)domjam Wrote: The game itself has a good speed (40-60fps).

Full-speed = No sound issues
Not full-speed = Sound issues

[Gotex007]

I'm having an issue with the latest versions. I can't remember how far to roll back so I'm hoping this issue can get resolved so I don't have to roll all the way back to 4.0.

Anyway, I can't seem to do much of anything. I keep getting the fatal error "Trampoline Cache Full" usually at the end of the first battle I fight. Any known solution for this?

[unknown267]

Sorry if I'm doing something I shouldn't be doing, but I need some help regarding setting the controls and stuff. I have a friend who wants to play together with me (she wants to play Emil while I play Marta). For convenience, we connected two keyboards to the same computer. Then I set the controls like I normally would, but here's the problems we have:

- My friend cannot guard at all.
- If I guard, I apparently force my friend to move backwards.
- My friend cannot use the Artes that are set under the 2nd-4th slots. In a sense, she can only use one Arte...
- Out of battle, if I press the key that is set to the B button, I move downwards. Just a minor problem, but still.

I have tried to use newer builds like 4.0 and 3.5 straight off the downloads page under "stable versions" but it only caused MORE problems with our controls. The keys seem to be switched around to where I can't find what is what...like, my B button makes me move down or my X button makes me move left...I don't know it's just so weird. The best build I have found so far is a really old version 3.0-735.

Hm, perhaps this can be better explained with pictures.

http://i.imgur.com/paNiHXu.png - This is the arte setting my friend has. She cannot use any of them except Demon Fang.
http://i.imgur.com/VObY0Pl.png - This is the settings for GCPad 1
http://i.imgur.com/27lZFgX.png - This is the settings for GCPad 2. Whatever key I set for X button will not work, so my friend cannot guard.
http://i.imgur.com/iKDRCIS.png - This is the settings for Wiimote 1
http://i.imgur.com/X1fkVXA.png - And the settings for Wiimote 2

Any help is much appreciated. I really want to get back into playing Tales games again.

[skid]

(10-09-2013, 10:50 AM)Gotex007 Wrote: Anyway, I can't seem to do much of anything. I keep getting the fatal error "Trampoline Cache Full" usually at the end of the first battle I fight. Any known solution for this?

You need a version newer than Dolphin 4.0-231 to fix this error.

[Garteal]

(11-02-2013, 08:58 PM)unknown267 Wrote: Sorry if I'm doing something I shouldn't be doing, but I need some help regarding setting the controls and stuff. I have a friend who wants to play together with me (she wants to play Emil while I play Marta). For convenience, we connected two keyboards to the same computer. Then I set the controls like I normally would, but here's the problems we have:

- My friend cannot guard at all.
- If I guard, I apparently force my friend to move backwards.
- My friend cannot use the Artes that are set under the 2nd-4th slots. In a sense, she can only use one Arte...
- Out of battle, if I press the key that is set to the B button, I move downwards. Just a minor problem, but still.

I have tried to use newer builds like 4.0 and 3.5 straight off the downloads page under "stable versions" but it only caused MORE problems with our controls. The keys seem to be switched around to where I can't find what is what...like, my B button makes me move down or my X button makes me move left...I don't know it's just so weird. The best build I have found so far is a really old version 3.0-735.

Any help is much appreciated. I really want to get back into playing Tales games again.

Hi unknown,

Tales of Symphonia: Dawn of the New World uses the Wiimote and Nunchuck for the controls. The Gamecube controller is not supported in this game.

You've mapped some buttons to the Wiimote, but have you also checked the Nunchuck? It's in the extension category in the Wiimote configuration window.
Make sure you're not using the same buttons.

Dolphin versions 3.5 and 4.0 should work fine for the game if you set up the controls properly.

[unknown267]

(11-02-2013, 10:14 PM)Garteal Wrote:

(11-02-2013, 08:58 PM)unknown267 Wrote: Sorry if I'm doing something I shouldn't be doing, but I need some help regarding setting the controls and stuff. I have a friend who wants to play together with me (she wants to play Emil while I play Marta). For convenience, we connected two keyboards to the same computer. Then I set the controls like I normally would, but here's the problems we have:

- My friend cannot guard at all.
- If I guard, I apparently force my friend to move backwards.
- My friend cannot use the Artes that are set under the 2nd-4th slots. In a sense, she can only use one Arte...
- Out of battle, if I press the key that is set to the B button, I move downwards. Just a minor problem, but still.

I have tried to use newer builds like 4.0 and 3.5 straight off the downloads page under "stable versions" but it only caused MORE problems with our controls. The keys seem to be switched around to where I can't find what is what...like, my B button makes me move down or my X button makes me move left...I don't know it's just so weird. The best build I have found so far is a really old version 3.0-735.

Any help is much appreciated. I really want to get back into playing Tales games again.

Hi unknown,

Tales of Symphonia: Dawn of the New World uses the Wiimote and Nunchuck for the controls. The Gamecube controller is not supported in this game.

You've mapped some buttons to the Wiimote, but have you also checked the Nunchuck? It's in the extension category in the Wiimote configuration window.
Make sure you're not using the same buttons.

Dolphin versions 3.5 and 4.0 should work fine for the game if you set up the controls properly.

Oh! I did not notice the Nunchucks in the config window! I was fooled into thinking the GC controller was a part of the game because well, it's a long story but anyway, now that I know about the Nunchucks again, everything works smoothly!

[XXFanXofX4869XX]

I couldn't seem to find my problem anywhere else, so I'm posting here.

I'm currently using version 4.0.2, and while the game seems to run just fine (despite the lag) Gecko codes don't seem to work. The only one I've been able to get to work is the Item Expansion to 99 code. Nothing else - use manuscripts on anyone, unlock Lloyd and Co. for levelling up, have infinite SP - seems to work.

Does anyone else have this problem?

[vsub]

Does this game need some special settings because I have two small problems with it(which rarely appear)

1.Sometimes randomly it takes a lot more time to start a battle than normal(even normal battle)
2.Sometimes when the game fade to another screen(for example going to new area or starting a skit),I see the last battle in the background instead of black background and the only way to fix it(which I found)is to create a save state and load it.

I'm using 4.0.4791 with default settings.

And one another question...is there is a way to reduce the analog input.I set the right analog of my gamepad as IR but the cursor is moving way too fast so I have to set it to the mouse movements(which I don't really want).I want when I hold R2 to show the cursor(otherwise hide)and move it with the right analog