[Wii] Arc Rise Fantasia

[vingadorjr]

admin89... my motherboard are a pain to configure a overclock more than 391 (3.15 mhz) on the bios... the bios doesnt have the vcore option. Do you know something about the P5G41-M LX? My processor is a Q9400, and can go till 3.6 mhz without much problems. If you can help here, i apreciate.

Thanks.

[IcemanSR]

(04-24-2011, 10:35 PM)hyperspeed Wrote:

(04-23-2011, 10:47 AM)admin89 Wrote: At first , i oced it to 3.4ghz on Intel stock fan last year
No problem so far , i raise it to 3.5ghz and now 3.6ghz ( new thermal paste)
Max temp with dolphin is 60C
Edit : My PC runs 24/7

Thanks, it's always good to know more about OC.
Thanks @admin89.

---

(04-23-2011, 11:24 AM)vingadorjr Wrote: Thanks hyperspeed... i will wait till monday to try and overclock my processor to 3.6, like a video ive seen on youtube of the same processor, cause if i burn something, i will go and buy another... here on Brazil is hollyday till monday. LOL

Here too.

You DO understand that this setup as in picture will break all airflow in your case needed for cooling it?and as result u will get more temp instead less.




on left fans that shoot air outside of case,on right fans that poor cold air inside the case.

[admin89]

55-65C under load on both CPU and GPU when playing wii games , idle : 30-40C for 24/7
2 external fan : 2000rpm & 4000rpm that blow all heat outside (left and right)
I always come up with strange idea like : 20mm fansink mod in my laptop

[Faizon]

(03-24-2011, 11:07 PM)bjakja Wrote: I almost finish this game using direct3d11, and it sometime crushes but graphics with AA8x is great, game runs all the time full speed.

Faizon, do you have sync problems on movies, cutscenes or everywhere? I've only had small desync problem on first and second movies, rest have good sync.

I Tried codes for character change, and Adele 1 makes dolphin crush when I select character, and Adele 2 it always starts from 1 level after load from save.

Darn! I just saw your answer after one month .
I have my desync problem during cutscenes, and only cutscenes. Which build of Dolphin did you use?
Thank you!

[bjakja]

r 6970 sse 4.2 by lectrode, was first, but it liked to crush, then after some tests I used to the very end r7335 x64 regular version, and it do not have any desync on cutscenes but speed must be anytime 100%, when drops down, then you got desync. Using GTX 560Ti, on dx11 games used about 40% cpu and gpu and I have aa4x with scale 3x and aa 8x with integral scale. Anyway on every revs I used it liked to cuts sound and Dolphin randomly crushed, thats why I saved alot using Dolphin saves which did like to not work. It's my second game, after Avatar 2009, which randomly crushes Dolphin.

[ggreen737]

I'm having constant crashing no matter which revision I seem to use!! Trying recommended settings and everything, alternating between d3d9 and dx11 plugin, no luck. I've made it about 2 hours in and have crashed probably 15-20 times! Any thoughts? Maybe I need to do the disc again or something because I've never had crashing so often with any game, especially when I feel like I've tried every combination of settings.

Grrr, frustrating

[HollowNinja]

Whenever I start this game, it gives some sort of error. It plays perfectly fine after that, though. Cutscenes desynced a bit, but when I turned off AA the game sped up and the desync was gone.

EDIT: Nevermind, it's still there. It can get pretty bad at times. The sound will play before the graphics and subtitles catch up.

[cloudh09]

Hi!
My Pc : AMD dual core 64x2 2.7ghz, 4gb ram and VGA HD4650 ddr3 1gb. I can play Arc Rise Fantasia with high fps?
Sorry about my English
THank!

[Link_to_the_past]

(06-19-2011, 06:01 PM)cloudh09 Wrote: Hi!
My Pc : AMD dual core 64x2 2.7ghz, 4gb ram and VGA HD4650 ddr3 1gb. I can play Arc Rise Fantasia with high fps?
Sorry about my English
THank!

No, i don't think so.

[rexen92]

i has a problem with the arc rise fantasia....the game work properly but when on the movie sometime the audio is faster than the move...is there any solution to fix this problem???sorry for bad english...