Unsadisfactory frame rate. Software, hardware or setting?

[Anti-Ultimate]

(04-12-2014, 07:46 AM)Nyrii Wrote:

(04-11-2014, 11:48 PM)cluthz Wrote: A bit off topic but 1.349V on cpu, or am I reading it wrong?

(04-12-2014, 12:07 AM)Anti-Ultimate Wrote: Another person trying to melt their processor.

Spoiler: (Show Spoiler)

1.3V is incredibly high for Haswell, you shouldn't do it 24/7

1.350v was the lowest voltage I could give to get 4.5 stable. I did a fair bit of reading up before attempting an OC and after I did I described every step, clock and voltage at overclock.net and while no one told me I'd be melting my processor, yes, 1.3v+ is pretty high for 4.5, but maybe I got a bad chip? Temperatures are ~25c at idle and never go past 75c no matter what I did so far. A heavy non-synthetic stress test can get temps up to 80c or so.

Edit: Actually I might be able to get it as low as 1.330v if I am lucky but 1.325v is not stable for certain.

Try Intel Burn Test and tell me it doesn't reach 85°C (the max for haswell should be around 75°C since it's 25nm)