Hello,
I'm on Debian buster and my BT adapter is a Cambridge Silicon Radio one. It looks like a pretty common model, even the ubuntu wiki lists it in the example commands: https://wiki.ubuntu.com/HardwareSupportComponentsBluetoothUsbAdapters and I have the same VendorID and ProductID:
So I put this rule in /etc/udev/rules.d/10-wii.rules :
but all I get in Dolphin is a blank screen and this in the logs:
I also see this message in the terminal from where I launch dolphin-emu:
I don't know if this adapter is known to work, or not work with dolphin, or if I'm doing something wrong here so any help is quite appreciated!
I'm on Debian buster and my BT adapter is a Cambridge Silicon Radio one. It looks like a pretty common model, even the ubuntu wiki lists it in the example commands: https://wiki.ubuntu.com/HardwareSupportComponentsBluetoothUsbAdapters and I have the same VendorID and ProductID:
Code:
$ lsusb
...
Bus 003 Device 024: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
...So I put this rule in /etc/udev/rules.d/10-wii.rules :
Code:
SUBSYSTEM=="usb", ATTRS{idVendor}=="0a12", ATTRS{idProduct}=="0001", TAG+="uaccess"but all I get in Dolphin is a blank screen and this in the logs:
Code:
...
18:21:862 Core/IOS/USB/Bluetooth/BTReal.cpp:126 N[IOS_WIIMOTE]: Using device 0a12:0001 (rev 134) for Bluetooth:
18:36:249 Core/HW/EXI/EXI_DeviceIPL.cpp:340 N[OSREPORT]: BTU HCI command timeout - cmd opcode = 0xc13
18:44:265 Core/HW/EXI/EXI_DeviceIPL.cpp:340 N[OSREPORT]: BTU HCI command timeout - cmd opcode = 0xc0a
18:52:281 Core/HW/EXI/EXI_DeviceIPL.cpp:340 N[OSREPORT]: BTU HCI command timeout - cmd opcode = 0xc33
...I also see this message in the terminal from where I launch dolphin-emu:
Code:
UdevQt: unhandled device action "bind"I don't know if this adapter is known to work, or not work with dolphin, or if I'm doing something wrong here so any help is quite appreciated!
