(TR Remote) How to get new wiimote motion+ to work. RVL-CNT-01-TR

[JayWood2010]

To make a long story short it seems asking questions on this site doesn't work well without getting your threads closed and being directed to threads where you have to read through 100's of pages. So I decided to make a quick and easy guide for you all so you can get your new wii motion+ working with dolphin, aka RVL-CNT-01-TR.

Step 1- You need to download the Bluetooth Toshiba Stack which is located here http://www.sitecom.com/download/4791/toshiba_8.htm

Step 2- After installing the Bluetooth Toshiba Stack download the newest Dolphin Emulator

Step 3- Download Xoppa Dolphin Emulator and extract it into your Dolpin Folder.

For Windows 64 bit http://www.xoppa.com/download/dolphin-tr-x64.zip
For Windows 32 Bit http://www.xoppa.com/download/dolphin-tr-x86.zip

Step 4- Do not have Dolphin Open just yet. You need to connect your wiimote Motion+ first. This is the steps used to connect your TR Remote.

1. Click to pair a new device, follow the instructions and press the 1 and 2 button on the TR remote enter discovery mode. The remote should now be listed as paired device.
2. Right click the TR and select connect, a dialog pops up.
3. Press the A button on the remote and click OK on the dialog.
4. The remote should be connected now, but no leds. Check this by pressing the A button, no leds should blink. If leds start to blink restart from 2.
5. Open Dolphin (first close if it was still open), make sure it has the code changes stated above, hit the Wiimote button and press refresh.
6. One led on the TR should light up indicating it's number and the TR rumbles. If not hit refresh again or restart from 2.
The TR should now be fully functional.

Good luck everybody, and hope this saves you all some time. If this thread is already made, just close it. Have fun.

[DefenderX]

False forum, dude. Controller related stuff comes in the controller forum >.>

@Mods: Pls move.

[Shonumi]

JayWood2010, please keep all controller related questions/guides/topics in the Controller Forum. That's why it's there.

[JayWood2010]

(04-26-2012, 05:04 AM)DefenderX Wrote: False forum, dude. Controller related stuff comes in the controller forum >.>

@Mods: Pls move.

I apologize. I'll re-post it there

[mikeydoom1988]

I too have the new TR wiimote with motion+ built in, and I have a Rocket Fish Blue Tooth Adapter and Toshiba Stack. I connect it like you say to, then try to connect it through dolphin when all the LEDs go off after connecting, and it just said, Only supports microsoft bluetooth stack.

[DarthVSoldier]

(04-26-2012, 05:02 AM)JayWood2010 Wrote: To make a long story short it seems asking questions on this site doesn't work well without getting your threads closed and being directed to threads where you have to read through 100's of pages. So I decided to make a quick and easy guide for you all so you can get your new wii motion+ working with dolphin, aka RVL-CNT-01-TR.

Step 1- You need to download the Bluetooth Toshiba Stack which is located here http://www.sitecom.com/download/4791/toshiba_8.htm

Step 2- After installing the Bluetooth Toshiba Stack download the newest Dolphin Emulator

Step 3- Download Xoppa Dolphin Emulator and extract it into your Dolpin Folder.

For Windows 64 bit http://www.xoppa.com/download/dolphin-tr-x64.zip
For Windows 32 Bit http://www.xoppa.com/download/dolphin-tr-x86.zip

Step 4- Do not have Dolphin Open just yet. You need to connect your wiimote Motion+ first. This is the steps used to connect your TR Remote.

1. Click to pair a new device, follow the instructions and press the 1 and 2 button on the TR remote enter discovery mode. The remote should now be listed as paired device.
2. Right click the TR and select connect, a dialog pops up.
3. Press the A button on the remote and click OK on the dialog.
4. The remote should be connected now, but no leds. Check this by pressing the A button, no leds should blink. If leds start to blink restart from 2.
5. Open Dolphin (first close if it was still open), make sure it has the code changes stated above, hit the Wiimote button and press refresh.
6. One led on the TR should light up indicating it's number and the TR rumbles. If not hit refresh again or restart from 2.
The TR should now be fully functional.

Good luck everybody, and hope this saves you all some time. If this thread is already made, just close it. Have fun.

Dude you're my hero! i'm new to dolphin and i just bought a TR wiimote 2 weeks ago...i tried everything in vain! Microsoft stack, blue soleil stack, different dolphin versions to no avail....i followed your guide step by step and my -TR wiimote works like a charm...i was about to throw it away, i'm not sure if it work on all versions but right now im using it in 3.0-754, you've made my day, cheers from central america, cheers bro!!

[allthetech489]

i am still having issues. then my remote connects and then disconnects immediately. when i click connect i press a the ok. i get this note:Bluetooth settings
Waiting for the connection from the HID device. If the device has been reset , check that it is working, then try to connect it again. what do i do?????

[allthetech489]

(04-26-2012, 05:02 AM)JayWood2010 Wrote: To make a long story short it seems asking questions on this site doesn't work well without getting your threads closed and being directed to threads where you have to read through 100's of pages. So I decided to make a quick and easy guide for you all so you can get your new wii motion+ working with dolphin, aka RVL-CNT-01-TR.

Step 1- You need to download the Bluetooth Toshiba Stack which is located here http://www.sitecom.com/download/4791/toshiba_8.htm

Step 2- After installing the Bluetooth Toshiba Stack download the newest Dolphin Emulator

Step 3- Download Xoppa Dolphin Emulator and extract it into your Dolpin Folder.

For Windows 64 bit http://www.xoppa.com/download/dolphin-tr-x64.zip
For Windows 32 Bit http://www.xoppa.com/download/dolphin-tr-x86.zip

Step 4- Do not have Dolphin Open just yet. You need to connect your wiimote Motion+ first. This is the steps used to connect your TR Remote.

1. Click to pair a new device, follow the instructions and press the 1 and 2 button on the TR remote enter discovery mode. The remote should now be listed as paired device.
2. Right click the TR and select connect, a dialog pops up.
3. Press the A button on the remote and click OK on the dialog.
4. The remote should be connected now, but no leds. Check this by pressing the A button, no leds should blink. If leds start to blink restart from 2.
5. Open Dolphin (first close if it was still open), make sure it has the code changes stated above, hit the Wiimote button and press refresh.
6. One led on the TR should light up indicating it's number and the TR rumbles. If not hit refresh again or restart from 2.
The TR should now be fully functional.

Good luck everybody, and hope this saves you all some time. If this thread is already made, just close it. Have fun.

which bluetooth dongle do you use and where did you get it from