speedforce pedals

honepi · 10-31-2020, 05:27 PM #1

The f-zero gx generates a slide by pressing the accelerator and brake at the same time. This proves that the axes of the accelerator and brake are independent of each other. However, in the dolphin configuration they are considered to be on the same axis. Is there a solution?

**Billiard26** · (This post was last modified: 11-01-2020, 12:01 AM by Billiard26.)

Yes. Our interface for mapping the wheel is bad.
Fortunately pushing c-stick up will activate the brake so you can use it simultaneously with the accelerator activated with the main stick.

honepi · 11-01-2020, 08:21 PM #3

(11-01-2020, 12:00 AM)ビリヤード26 Wrote: Yes. Our interface for mapping the wheel is bad.
Fortunately pushing c-stick up will activate the brake so you can use it simultaneously with the accelerator activated with the main stick.

Do I need a special plugin to do that?

The f-zero air brakes did not work on my dolphin.

**Billiard26** · (This post was last modified: 11-01-2020, 11:56 PM by Billiard26.)

You'll need to use a recent version of Dolphin (Not 5.0).
Show a screenshot of your configuration if you're still having problems.

honepi · 11-02-2020, 04:14 AM #5

(11-01-2020, 11:55 PM)Billiard26 Wrote: You'll need to use a recent version of Dolphin (Not 5.0).
Show a screenshot of your configuration if you're still having problems.

That was the stable version, so using the development version solved the problem.

Thank you very much.