I got mine to work, after just buying a black wiimote+ (RVL-CNT-01-TR). I did not have success pairing via MS built in software (I have Win7 Pro x64). My BT adapter is "Zoom Bluetooth USB Model 4322". My roommate had this laying around, so I cannot say where you could get this. Anyway, Dolphin is 3.0-735, and I'm using the ICC optimized (SSE4.2) by vlakipn. So here's what I did:
1) Downloaded Toshiba Bluetooth stack v8.00.03. I installed the x64 bit obviously. I then restarted pc.
2) Toshiba stack was autoloaded by PC at boot, and I did "Add new connection"
3) it automatically started scanning for devices but I was not ready, so it ended up timing out and going back to the main screen, where it's just the little box and "New Connection" button
4) Popped out battery of wiimote, put back in
5) Press "New Connection"
6) when it says express or manual, I chose Express
7) The wizard says Scanning for devices
8) Press 1+2
9) it found the controller and now it has it in the main window, above "New Connection" button
10) almost done! Now you have to double click the "Nintendo RVL...etc" device and it will say "prepare the device and press OK"
11) Press OK then another window will say like "connecting to device"
12) Now press A. remember, this is the trick of these new wiimotes it seems. Use 1+2 only the first time when you originally pair the device with your pc (or after you have deleted it). And then only use A to pair from then on, once it has seen it.
13) you will know it works because no lights come on the wii mote after pressing buttons.
14) Start Dolphin
15) press the "Wiimote" configuration button
16) it should vibrate if the menu is already set to "Real Wiimote" beforehand.
Thats it! It sounds long, but it's a very fast process. I hope this helps newbies (like me) who have spend hours googling and reading 100s of posts on how to get these darn new wiimotes to work xD
1) Downloaded Toshiba Bluetooth stack v8.00.03. I installed the x64 bit obviously. I then restarted pc.
2) Toshiba stack was autoloaded by PC at boot, and I did "Add new connection"
3) it automatically started scanning for devices but I was not ready, so it ended up timing out and going back to the main screen, where it's just the little box and "New Connection" button
4) Popped out battery of wiimote, put back in
5) Press "New Connection"
6) when it says express or manual, I chose Express
7) The wizard says Scanning for devices
8) Press 1+2
9) it found the controller and now it has it in the main window, above "New Connection" button
10) almost done! Now you have to double click the "Nintendo RVL...etc" device and it will say "prepare the device and press OK"
11) Press OK then another window will say like "connecting to device"
12) Now press A. remember, this is the trick of these new wiimotes it seems. Use 1+2 only the first time when you originally pair the device with your pc (or after you have deleted it). And then only use A to pair from then on, once it has seen it.
13) you will know it works because no lights come on the wii mote after pressing buttons.
14) Start Dolphin
15) press the "Wiimote" configuration button
16) it should vibrate if the menu is already set to "Real Wiimote" beforehand.
Thats it! It sounds long, but it's a very fast process. I hope this helps newbies (like me) who have spend hours googling and reading 100s of posts on how to get these darn new wiimotes to work xD