Real Wiimote Issues.

[Slacker]

Been searching solo for a solution to my problem for about a week now with no luck, hoping I can find some help here.

I'm trying to connect a real wiimote (with motion plus attachment and nunchuk) to play skyward sword. Bought a bluetooth dongle and wireless sensor bar.

Running Windows 7x64, default microsoft stack detects wiimote just fine, pair it up in dolphin, (have tried 3.0 and 3.0-766) Player 1 light stays on, config page reads one wiimote connected, refresh signal makes the controller buzz. However, no cursor shows up, no button presses register when in game.

Have tried different stacks (microsoft, widcomm, toshiba, bluesoleil), tried testing on different programs like WiinRemote to see if I could get any movement to register. Swapped up controllers between current, an older official wiimote, and a Nyko wand. No luck. I believe maybe BlueSoleil registered button presses, but still no motion. Wiinremote won't read any input, but does show as connected.

Any ideas would be greatly appreciated, I'm close to just trying to sell all the wiimote stuff back and playing on a good old reliable 360 pad.

[Axxer]

First of all, Skyward Sword requires motion plus, so you will have to get that working. There are unnofficial motion plus builds, but I don't think the experience is as good.

Second, you said you tried a Nyko wand and an official remote and a "real wiimote" (didn't see a brand specified). The 3rd party ones are unreliable for dolphin, so don't bother. The official remote should work though.

[Slacker]

(09-10-2012, 08:45 AM)Axxer Wrote: First of all, Skyward Sword requires motion plus, so you will have to get that working. There are unnofficial motion plus builds, but I don't think the experience is as good.

Second, you said you tried a Nyko wand and an official remote and a "real wiimote" (didn't see a brand specified). The 3rd party ones are unreliable for dolphin, so don't bother. The official remote should work though.

I'm aware i will need to get motion plus working, but first I need to get the basics working. To clarify, I have 1 black wiimote, one old white wiimote (both of these are official, nintendo brand), and a nyko wand, all of which have achieved the same degree of success/failure.

[BrandeX]

take a photo of your "sensor" bar, and see if tere is actually any IR light coming out of it.

[Slacker]

(09-10-2012, 04:40 PM)BrandeX Wrote: take a photo of your "sensor" bar, and see if tere is actually any IR light coming out of it.

Just checked, and it seems to be working fine, 4 ir lights on either side. Nifty trick, btw.

Still no success with reading the motion input or button presses though =/

[Jarkiro]

I have the same Problem, even with Microsoft and Toshiba stack. Does your Wiimote looks like this:

[Slacker]

(09-14-2012, 04:59 AM)Jarkiro Wrote: I have the same Problem, even with Microsoft and Toshiba stack. Does your Wiimote looks like this:

nope, mine has motion plus as a seperate attachment. Having it on or off has no effect on its failure to work.