I use a DualShock 3 pad connected via USB to my Mac. When setting up as a GameCube controller, I had gotten pressure sensitivity to work properly for the triggers by assigning L and L-Analog to "Axis CK-39-+", and R and R-Analog to ""Axis CK-40-+".
![[Image: Dolphin_Config_5522.png]](https://image.ibb.co/kKfxvb/Dolphin_Config_5522.png)
This setup has worked just fine for a while, until it was broken in 5.0-5524, remaining broken through all subsequent releases. The last revision where it works (and the revision I'm currently using as a result) is 5.0-5522. In that version, the binding dialog looks like this:
![[Image: Dolphin_Config_5522_Axis.png]](https://image.ibb.co/dieqFb/Dolphin_Config_5522_Axis.png)
There are a ton of different axis listed, for all the accelerometers and all that. However, this is what happens now when looking into the bindings in 5.0-5627:
![[Image: Dolphin_Config_5627_Axis.png]](https://image.ibb.co/gLEPab/Dolphin_Config_5627_Axis.png)
Nearly all of the various axis are completely missing including the all important 'CK-39-+' and 'CK-40-+', and at the bottom it says "device not found". I realize I can simply assign the analogs to different buttons, but this detracts from the experience somewhat; it was more authentic having proper trigger pressure response.
Where did all the bindings disappear to?
If all the random axis were removed to make assigning buttons easier (those dang accelerometers always got in the way if the pad wasn't perfectly still when pressing buttons) I understand, but those two trigger axis got thrown out with them!
Mario Sunshine isn't the same when having to press two buttons for what should be just varying degrees of one button press
Love this emulator
and want to be able to keep updating to enjoy all the newer optimizations. Hope it's an easy fix!
This setup has worked just fine for a while, until it was broken in 5.0-5524, remaining broken through all subsequent releases. The last revision where it works (and the revision I'm currently using as a result) is 5.0-5522. In that version, the binding dialog looks like this:
There are a ton of different axis listed, for all the accelerometers and all that. However, this is what happens now when looking into the bindings in 5.0-5627:
Nearly all of the various axis are completely missing including the all important 'CK-39-+' and 'CK-40-+', and at the bottom it says "device not found". I realize I can simply assign the analogs to different buttons, but this detracts from the experience somewhat; it was more authentic having proper trigger pressure response.
Where did all the bindings disappear to?
If all the random axis were removed to make assigning buttons easier (those dang accelerometers always got in the way if the pad wasn't perfectly still when pressing buttons) I understand, but those two trigger axis got thrown out with them!
Mario Sunshine isn't the same when having to press two buttons for what should be just varying degrees of one button press
Love this emulator
and want to be able to keep updating to enjoy all the newer optimizations. Hope it's an easy fix!
![[Image: sig-22354.png]](http://www.spyber.com/sig-22354.png)