Problem with Hibrid mode. how to use 360Pad as Nunchuk and IR on Wiimote?

[leomar x]

is possible to use 360pad as nuchuk and wiimote like itself on hybrid wiimote mode?

Let me explain:
my wiimote works perfect, but I have a horrible dead zone on my nuncuk

then I tried to use the "hybrid wiimote" mode.
360pad = nunchuk.
wiimote = itself.

here is my problem:
in hybrid mode the cursor functions (IR) are assigned to the mouse, not for the wiimote, this makes impossible to use the 360pad in a hand with the wiimote on the another hand.

there is any way to use the 360 ​​pad as nunchuck and maintain the IR functions on the wiimote?

THX!

[AnyOldName3]

The closest thing would be to put the IR controls on the other analogue stick, but that won't be as good as a mouse or a real cursor. Why can't you just set the cursor back to Wiimote by clearing the field in the hybrid remote config?

[leomar x]

(05-03-2012, 04:25 AM)AnyOldName3 Wrote: The closest thing would be to put the IR controls on the other analogue stick, but that won't be as good as a mouse or a real cursor. Why can't you just set the cursor back to Wiimote by clearing the field in the hybrid remote config?

thx by reply.

because it don't works corret!
i wanna use Ir cursor on wiimote, but it is forced to use on mouse
my 360 pad works fine like a nunchuck, i just wanna use ir on ir sensor of wiimote, even if I clear all the options of the mouse, yet the cursor does not move by Ir on wiimote, it will stay static in the center of the screen.

[AnyOldName3]

Do you have a sensor bar? If you do then something isn't working, and we may be able to fix that. If you don't, then you could get one, or make one, or even bodge one by putting two lit candles 21cm apart under (yet a little bit in front of) your monitor.

[leomar x]

(05-04-2012, 01:29 AM)AnyOldName3 Wrote: Do you have a sensor bar? If you do then something isn't working, and we may be able to fix that. If you don't, then you could get one, or make one, or even bodge one by putting two lit candles 21cm apart under (yet a little bit in front of) your monitor.

yes I have a sensor bar. it works perfect on real wiimote mode(without nunchuk), but in the hybrid mode all cursor functions are assigned to the mouse and even with the sensor bar and wiimote this does not work.

[AnyOldName3]

Can't you just clear them by middle clicking, or make them use both with the OR function?

[leomar x]

(05-05-2012, 12:30 AM)AnyOldName3 Wrote: Can't you just clear them by middle clicking, or make them use both with the OR function?

I already tried that. I clean all keys on hybrid mode, the cursor does not work wiimotte.
if the hybrid mode is enabled, anything related to IT on wiimote is not recognized, but all other functions on wiimote works perfectly, only IR is not recognized.

[AnyOldName3]

Can I ask why real Wiimote isn't being used? (Just read OP, and remembered nunchuck issue, so question has been answered.) Also, if you set up hybrid to blank, then it should do the same as the real Wiimote setting, and if it doesn't, then something is wrong. Is the nunchuck problem still the only one with the real Wiimote setting?

[leomar x]

(05-05-2012, 08:44 AM)AnyOldName3 Wrote: Can I ask why real Wiimote isn't being used? (Just read OP, and remembered nunchuck issue, so question has been answered.) Also, if you set up hybrid to blank, then it should do the same as the real Wiimote setting, and if it doesn't, then something is wrong. Is the nunchuck problem still the only one with the real Wiimote setting?

I have a real wiimote and nunchuk. (original nintendo)

wiimote with nunchuck = cursor works.
wiimote without nunchuck = cursor works

My nunchunk Have a horrible dead zone. in most games your character starts walking alone, is frustrating to fix the direction all the time.

wiimote with nunchuck with 360 = cursor don't works (Only on mouse)
wiimote without nunchuck with 360 = cursor don't works. (Only on mouse)

I tried some different settings, cleaning or changing the options on the hybrid mode, but none works.