
(Using Dolphin 5.0 - stable on Mac)
Right, so my first DS4 controller is working fine, it lets me map the buttons and it responds both in Dolphin and in game.
https://postimg.cc/image/3wenjruif/ (Standard setup)
https://postimg.cc/image/6rrqq6o3b/ (GameCube options)
https://postimg.cc/image/ronyv3m6v/ (Controller 1 setup)
My second controller, however, is not working at all.
It doesn't respond when I try to map, instead I get, 'Axis 33+.'
https://postimg.cc/image/r0f4bw093/ (Controller 2 setup)
https://postimg.cc/image/ctzdgx4w7/ (Axis 33+)
Now, I tried manually putting in the buttons myself and when I held, 'Detect' Dolphin responded when I pressed the buttons on the controller but after I closed the manual input window, it wouldn't work again. I saved the settings and closed the window, then when I reopened the configurations, it was all deleted and I couldn't load my settings again.
Another thing is that whenever the second controller presses buttons when Port 1 configurations are open, it sets itself to that port and then my other controller doesn't work.
Please help me, I have tried so many things and I am losing my mind trying to figure this out.
I have also tried,
-Inputting while only one controller is plugged in
-Setting controller 2 as controller 1 and 1 as 2
-Changing settings
-Background input on
-etc
Right, so my first DS4 controller is working fine, it lets me map the buttons and it responds both in Dolphin and in game.

https://postimg.cc/image/3wenjruif/ (Standard setup)
https://postimg.cc/image/6rrqq6o3b/ (GameCube options)
https://postimg.cc/image/ronyv3m6v/ (Controller 1 setup)
My second controller, however, is not working at all.

https://postimg.cc/image/r0f4bw093/ (Controller 2 setup)
https://postimg.cc/image/ctzdgx4w7/ (Axis 33+)
Now, I tried manually putting in the buttons myself and when I held, 'Detect' Dolphin responded when I pressed the buttons on the controller but after I closed the manual input window, it wouldn't work again. I saved the settings and closed the window, then when I reopened the configurations, it was all deleted and I couldn't load my settings again.
Another thing is that whenever the second controller presses buttons when Port 1 configurations are open, it sets itself to that port and then my other controller doesn't work.
Please help me, I have tried so many things and I am losing my mind trying to figure this out.





I have also tried,
-Inputting while only one controller is plugged in
-Setting controller 2 as controller 1 and 1 as 2
-Changing settings
-Background input on
-etc