SEE LAST POST BELOW!!!!!!!!!
SEE LAST POST BELOW!
SEE LAST POST BELOW!
New Wii U remote working using built in BT and built in adapter! TRY THIS
|
SEE LAST POST BELOW!!!!!!!!!
SEE LAST POST BELOW! 04-11-2014, 08:34 AM
>program what buttons
This part gives me pause. If you can't set it up as a normal Real Wiimote in Dolphin, it's barely worth using. Please clarify whether you have to set it up as an Emulated Wiimote or Real Wiimote, will you? If it does work as a Real Wiimote, this is pretty nice – people might now have a choice of stacks to use. (Also, someone fix the thread title length.)
<@skid_au> fishing resort is still broken: http://i.imgur.com/dvPiQKg.png
<@neobrain> dafuq <+JMC47> no dude, you're just holding the postcard upside down ---------------------------------------- <@Lioncash> pauldachz in charge of shitposting :^) 04-11-2014, 08:51 AM
once you right click on the mouse icon at the top of bluesoleil software and choose connect, all four lights will be blinking on the wii u mote.
then open dolphin, click on the wiimote tab, and in the first wiimote choose real wiimote, and make sure continuous scanning is checked. my balanced board setting is: real balanced board, hit refresh multiple times, wii mote will vibrate, and the four lights on wiimote will go out leaving one blue square lit up. hit ok. the button configuration will be done for you. load game and play. do you understand this now? its working flawlessly on my, can record video showing it if you want. if you have Lenovo y510p laptop and bluesoleil v.10, it will work for you too! its not going to happen fast first time, sometime you have to close wiimote tab, then click on wiimote tab again. I also noticed sometimes I go into wiimote tab, select those thing I said earlier, hit refresh, click ok, then wii mote vibrated. if you got four lights on wii mote flashing your almost there. just tinker in the wiimote tab til wiimote vibrates, then ckick ok. good to go from there. IT WORKS AS REAL WIIMOTE!!!!! even has sound from game coming out wiimote speaker!!!!! just a FYI: bluesoleil v.10 not free ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- OK THINK IVE GOT IT READ BELOW have tinkered with it, and i think i have it. make sure your using bluesoleil v.10 (should work on any bluetooth dongle) in blue soleil scan for new bluetooth devices, it will find nintendo controller. look at wiimote, if all blue lights are off, make them all flash again, while they are flashing, right click on nintendo controller ans scan for services. it will find one service: the mouse. right click on the mouse icon at the top of bluesoleil software, and choose connect. at this time all four lights on wiimote will be flashing. were almost there..... open dolphin, and open wiimote tab. in wiimote#1 choose real wiimote, and make sure continous scanning is checked. hit refresh, then hit ok. wiimote should vibrate. choose game and play. just hooked up nuchuk, works flawlessly too 04-15-2014, 05:21 AM
first off, having bluesoleil v.10 software I didn't have a problem connecting my wii motionplus remote. after seeing a lot, and I mean a lot of people having trouble connecting the wii remote to their pc's, I decided to investigate if its possible to connect the wii remote to a pc without
using special software like bluesoleil, or software that runs codes to connect the remote. before I go into how to connect your wii remote to your pc, I want to say that this might not work for everybody. but think of it like this, you've tried every way possible right? so whats it gonna hurt to try this, and it might work for you like it did me. now with that lets begin: im running windows 8.1 64 bit system (yea I know) I deleted bluesoleil v.10 software from my pc, now running factory Bluetooth and factory built in Bluetooth. but this should work for your system too. step 1: take off battery cover on wii remote, and split your pc screen into two. step 2: on one side have Bluetooth ready to scan for new devices, and the other side have devices and printers open step 3: hit sync on the wii remote (keep your finger near it, so you can constantly make it discoverable), then in blutooth scan for new devices (should list Nintendo). step 4: as soon as it finds the Nintendo, constantly hit sync then in devices and printers click on "add a device", it should find the Nintendo, then install software for it. once it installs software for it, lights will be all flashing on wii remote, open dolphin, then open wiimote, in wiimote#1 choose real wiimote, then hit refresh, then hit ok. wiimote will vibrate, and light #1 will be the only led on. wiimote will be ready. load a game and test. if this works please post saying so, and if didn't, list what it's doing and ill try and help you get it connected! P.S. IF DEVICES AND PRINTERS ASK FOR PASSCODE LIKE BLUETOOTH DOES, JUST CLICK NEXT. DONT ENTER ANYTHING FOR PASSCODE. WILL INSTALL SOFTWARE WITHOUT CODE! lil_pup 04-16-2014, 05:19 AM
Then I read in another thread:
Quote:From: lil_pup Older Wii Remote Plus are reported as RVL-CNT-01 and works without any issues with any BT Stack. The new Wii Remote Plus are -TR remotes with still won't connect to any BT stack except Toshiba Stack, making the whole topic invalid.
Avell A70 MOB: Core i7-11800H, GeForce RTX 3060, 32 GB DDR4-3200, Windows 11 (Insider Preview)
ASRock Z97M OC Formula: Pentium G3258, GeForce GT 440, 16 GB DDR3-1600, Windows 10 (22H2) |
« Next Oldest | Next Newest »
|