once you right click on the mouse icon at the top of bluesoleil software and choose connect, all four lights will be blinking on the wii u mote.
then open dolphin, click on the wiimote tab, and in the first wiimote choose real wiimote, and make sure continuous scanning is checked. my balanced board setting is: real balanced board,
hit refresh multiple times, wii mote will vibrate, and the four lights on wiimote will go out leaving one blue square lit up. hit ok. the button configuration will be done for you. load game and play.
do you understand this now? its working flawlessly on my, can record video showing it if you want. if you have Lenovo y510p laptop and bluesoleil v.10, it will work for you too!
its not going to happen fast first time, sometime you have to close wiimote tab, then click on wiimote tab again. I also noticed sometimes I go into wiimote tab, select those thing I said earlier, hit refresh, click ok, then wii mote vibrated. if you got four lights on wii mote flashing your almost there. just tinker in the wiimote tab til wiimote vibrates, then ckick ok. good to go from there.
IT WORKS AS REAL WIIMOTE!!!!!
even has sound from game coming out wiimote speaker!!!!!
just a FYI: bluesoleil v.10 not free
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
OK THINK IVE GOT IT READ BELOW
have tinkered with it, and i think i have it.
make sure your using bluesoleil v.10 (should work on any bluetooth dongle)
in blue soleil scan for new bluetooth devices, it will find nintendo controller.
look at wiimote, if all blue lights are off, make them all flash again, while they are flashing, right click on nintendo controller ans scan for services.
it will find one service: the mouse.
right click on the mouse icon at the top of bluesoleil software, and choose connect. at this time all four lights on wiimote will be flashing. were almost there.....
open dolphin, and open wiimote tab.
in wiimote#1 choose real wiimote, and make sure continous scanning is checked.
hit refresh, then hit ok.
wiimote should vibrate.
choose game and play.
just hooked up nuchuk, works flawlessly too
then open dolphin, click on the wiimote tab, and in the first wiimote choose real wiimote, and make sure continuous scanning is checked. my balanced board setting is: real balanced board,
hit refresh multiple times, wii mote will vibrate, and the four lights on wiimote will go out leaving one blue square lit up. hit ok. the button configuration will be done for you. load game and play.
do you understand this now? its working flawlessly on my, can record video showing it if you want. if you have Lenovo y510p laptop and bluesoleil v.10, it will work for you too!
its not going to happen fast first time, sometime you have to close wiimote tab, then click on wiimote tab again. I also noticed sometimes I go into wiimote tab, select those thing I said earlier, hit refresh, click ok, then wii mote vibrated. if you got four lights on wii mote flashing your almost there. just tinker in the wiimote tab til wiimote vibrates, then ckick ok. good to go from there.
IT WORKS AS REAL WIIMOTE!!!!!
even has sound from game coming out wiimote speaker!!!!!
just a FYI: bluesoleil v.10 not free
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
OK THINK IVE GOT IT READ BELOW
have tinkered with it, and i think i have it.
make sure your using bluesoleil v.10 (should work on any bluetooth dongle)
in blue soleil scan for new bluetooth devices, it will find nintendo controller.
look at wiimote, if all blue lights are off, make them all flash again, while they are flashing, right click on nintendo controller ans scan for services.
it will find one service: the mouse.
right click on the mouse icon at the top of bluesoleil software, and choose connect. at this time all four lights on wiimote will be flashing. were almost there.....
open dolphin, and open wiimote tab.
in wiimote#1 choose real wiimote, and make sure continous scanning is checked.
hit refresh, then hit ok.
wiimote should vibrate.
choose game and play.
just hooked up nuchuk, works flawlessly too