Multiple X360 Pads as GC pads

08-18-2009, 10:28 AM #1

We were trying to play some mario party last night, but the x360 pad plug-in does not recognize more than 1 pad.

I have an Xbox 360 Wireless reciever for windows, and sync 4 pads with it.

Tried Xpadder, but there's not that many keys on a single keyboard! Some keys overlaps with Dolphin's functions, and configuration is not always perfect.

Any word on this?

CacoFFF · 08-18-2009, 10:31 AM #2

Have you tried using nJoy?

08-18-2009, 02:17 PM #3

nJoy always maps to A+0 or A-0

CacoFFF · 08-18-2009, 02:43 PM #4

You are using nJoy 0.4 then, have you tried 0.3?
If none of both map your axis correctly, you can manually edit the config file and specify the axes yourself.

***shuffle2*** · 08-18-2009, 04:23 PM #5

hm, this _should_ work fine, but i've never tested with wireless pads :p
you have to connect all pads and then start up dolphin, it only scans once. Then the connected pads _should_ appear in the drop-down list of the x360 pad plug-in.

08-18-2009, 10:58 PM #6

It's definitely not working with more than 1 wireless pad (only number 1 appears in the drop-down list), and njoy 0.3 keeps mapping to A+0 and A-0 too :S

CacoFFF · (This post was last modified: 08-19-2009, 03:10 AM by CacoFFF.)

nJoy sometimes failed in some revisions to detect axes in the config dialog but always worked ingame, post a pic of P1 config using nJoy.
And the nJoy.ini as well.

It shouldn't be so different to configure as any Dual analog game pad.
Since you have 4 xbox 360 controllers, manually setting player 1 and then copying those settings to p2,p3,p4 should work perfectly.
nJoy 0.3 and 0.4 save the config differently, so remember to tell which version you use.

EDIT: Say, the nJoy drop-down list only shows one of the wireless pads?
Does the control panel show 1 master pad (probably the wireless receiver) or 4 individual ones?