Mayflash GC Controller Adapter for PC USB Rumble Issues

[Amanuel]

I used to use a PS3 controller to use as a controller on dolphin. I ordered this so I could use an actual GameCube controller. All the inputs and analogs work fine, but the section for the Rumble Motor is simply empty. It worked before on my PS3 controller. Help would be appreciated.

[Sukid]

You need to install the drivers Mayflash made for the device. IF it didn't come with a disk you can find them on their website: http://www.mayflash.com/Support/Download/

However, I highly recommend using the calibration wizard for the controllers BEFORE installing their drivers, because their calibration doesn't let you calibrate the L and R triggers. Also in my experience the controllers start to rumble like crazy once you close the game. I have no idea why that happens.

[Amanuel]

(06-01-2014, 04:36 PM)Sukid Wrote: You need to install the drivers Mayflash made for the device. IF it didn't come with a disk you can find them on their website: http://www.mayflash.com/Support/Download/

However, I highly recommend using the calibration wizard for the controllers BEFORE installing their drivers, because their calibration doesn't let you calibrate the L and R triggers. Also in my experience the controllers start to rumble like crazy once you close the game. I have no idea why that happens.

I found the drivers, I cant find the calibration wizard option when I go to the properties of the Controller through the "Devices and Printers."

[ulao]

Some times in win7, depending on the drive, it wont show up right. So just download joy.cpl.
http://dc165.2shared.com/download/FEQD9vpF/JOY.CPL?tsid=20140608-132908-28b46e9c

If download is bad just google "download joy.cpl"