Mayflash GC Adapter Problem

yl-smash · (This post was last modified: 01-11-2014, 02:03 PM by yl-smash.)

I just received my adapter today after a long wait, and I am having difficulty. I installed the correct driver, and I plugged my controller into port 1 (left) and it is working fine. However when I plugged in another controller to port 2 (right) I am having problems. Everything on port 2 seems to work except the control stick, (playing smash bros brawl) I can only walk, not run. The stick does not give the full effect; it is as if it is inputting half of the command. In the dolphin gcpad settings it shows that the stick is going completely in the desired direction yet in game it does not function fully. I have tried using a different controller and different settings. Is there something I can do? Is my adapter defective? Is there any workaround? Help would be much appreciated.

On a side note, ever since I got this thing dolphin crashes when I stop emulating a game (pressing esc, closing out the page, emulation->stop).

EDIT: I turned the radius up to 100 and that solved the problem. Still don't know why dolphin is crashing. I can live with it, but it's very annoying.

**Billiard26** · 01-11-2014, 12:53 PM #2

Show a screenshot of your gcpad config.

yl-smash · 01-11-2014, 12:57 PM #3

http://puu.sh/6gIn0.png (port 1) http://puu.sh/6gIop.png (port 2)

dolphin revision 4.0-648 btw

**Billiard26** · 01-11-2014, 01:50 PM #4

Take a screenshot while your main stick is to the far right.

**JMC47** · (This post was last modified: 01-11-2014, 01:54 PM by JMC47.)

Edit: Assuming it's not dropped inputs, turn up the radius to 100 on cstick and control stick

It's a problem with the cheapass mayflash. If you really are using both controllers hardcore, it'll simply drop inputs. Everyone I know who uses it has problems with this.

yl-smash · (This post was last modified: 01-11-2014, 02:01 PM by yl-smash.)

Turning the radius up to 100 fixed it! Thank you JMC. Billiard if you wanted the screenshot anyways here it is. http://puu.sh/6gLJj.png

Now that that is resolved, anyone know why dolphin crashes after ending an emulation? Using the Mayflash adapter is the only thing that could have done it. I have never have problems with dolphin until then. This problem is consistent using 4.0-648 and 4.0.