Hybrid Controller issue

[lfitty]

Hey, i have searched around and have not found a problem like mine. Attempting to play Skyward Sword without a sensor bar but cannot get past the move (hand) to the middle of the screen. I use the real remote option and cannot get past this point.

If i choose hybrid remote, the wiimote does not appear under "devices", and when i click default settings, it sets all the keys to my keyboard and mouse, which makes it identical to the emulated wiimote.

This means the wiimote now has no response in game.
Note: i have played other games, and the wiimote is working fine.

Any possible solutions for my problems?
Thanks in advance.

[AnyOldName3]

Firstly, to make a function match the real Wiimote under emulated Wiimote, you need to leave that field blank, or clear it if it is already filled in.

Secondly, Skyward Sword requires a Wiimote with Motion Plus. If you don't already have an adapter or a Wiimote with motion plus, you'll need to get one (or use an emulated motion plus build, which officially isn't supported as it may not work).

The only thing controlled by the sensor bar is the IR pointer, so in the Hybrid Wiimote config, everything should be blank except this, which should be set to Cursor x and y, + and -.

If you have the Motion Plus already, then your easiest solution (as far as gameplay is concerned) is to put two lit candles about 20-25cm from each other under your computer monitor. This will do the exact same as a sensor bar, so will allow you to play exactly like on a Wii.

[lfitty]

(10-31-2012, 09:53 AM)AnyOldName3 Wrote: Firstly, to make a function match the real Wiimote under emulated Wiimote, you need to leave that field blank, or clear it if it is already filled in.

Secondly, Skyward Sword requires a Wiimote with Motion Plus. If you don't already have an adapter or a Wiimote with motion plus, you'll need to get one (or use an emulated motion plus build, which officially isn't supported as it may not work).

The only thing controlled by the sensor bar is the IR pointer, so in the Hybrid Wiimote config, everything should be blank except this, which should be set to Cursor x and y, + and -.

If you have the Motion Plus already, then your easiest solution (as far as gameplay is concerned) is to put two lit candles about 20-25cm from each other under your computer monitor. This will do the exact same as a sensor bar, so will allow you to play exactly like on a Wii.

Perfect!
Solved my issue thanks

[AnyOldName3]

You're welcome.