HOW TO : RVL-CNT-01-TR connecting to dolphin

[arcticmediagaming]

Hi all

I had also problems like many I read to get the RVL-CNT-01-TR working in dolphin.
After reading much and with trail and error I have come up with the ONLY working solution at the moment !

1. Download the toshiba bluetoothstack and install

http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=2468047&pf=true

2. Press the sync button on your wiimote ( pressing 1+2 does not work currently !)

3.Connect with toshiba bluetooth stack after connecting lights will still blink.

4. start dolphin

5. go to wiimote icon in dolphin

6. set it to real wiimote

7. press the refresh button ( controller should vibrate )

DO NOT PRESS PAIR UP OR IT DOES NOT WORK !YOU WILL GET THE MESSAGE

A SUPPORTED BLUETOOTH DEVICE WAS NOT FOUND!
(ONLY MICROSOFT BLUETOOTHSTACK IS SUPPORTED)

Also each time I boot my pc I need to press the sync button on the wiimote in order to sync it with the toshiba BT stack!
Then repeat steps 3 to 7 this is the only fix at the moment !

[kkc1945]

Is it possible to deinstall the Toshiba Stack and to get the Ms Stack again or do you need a special deinstall program

[arcticmediagaming]

(06-06-2012, 06:03 AM)kkc1945 Wrote: Is it possible to deinstall the Toshiba Stack and to get the Ms Stack again or do you need a special deinstall program

Yes you can uninstal BT stack from toshiba completly and get the MS BT stack back withouth a problem.
If you have any problems download driver cleaner to clean some leftovers

[Vitalius]

Ok, I have latest Dolphin, a Wii-mote with motion plus built in that is a TR model.

I followed your steps and everything works up until I try to hit refresh. Windows recognizes it (as Game Controller) and Dolphin even says it has a Wiimote paired (with 1 connected by Pair Up and Refresh) however whenever I click Refresh, nothing happens. The lights just keep blinking and it doesn't vibrate.

On a side note: I have Toshiba Stack installed, however I don't have any software to go along with it. I'm not sure if I should have it or if it should work the exact same as MS's stacks work. I am certain Toshiba stacks are installed.

Any help would be appreciated .

[arcticmediagaming]

(06-06-2012, 11:09 PM)Vitalius Wrote: Ok, I have latest Dolphin, a Wii-mote with motion plus built in that is a TR model.

I followed your steps and everything works up until I try to hit refresh. Windows recognizes it (as Game Controller) and Dolphin even says it has a Wiimote paired (with 1 connected by Pair Up and Refresh) however whenever I click Refresh, nothing happens. The lights just keep blinking and it doesn't vibrate.

On a side note: I have Toshiba Stack installed, however I don't have any software to go along with it. I'm not sure if I should have it or if it should work the exact same as MS's stacks work. I am certain Toshiba stacks are installed.

Any help would be appreciated .

Are you pressing the sync button on the wii controller ? and when you add a new connection with the toshiba you're saying it recognize it.
Does the connected symbol show up in toshiba stack?
are you 100% certain of the toshiba bluetooth stack ?
Could you upload a screenshot of your connected state in bluetooth and dolphin?
Just tested it on a second rig and works atm just fine.

[jcalvarado07]

   

(06-07-2012, 04:28 AM)arcticmediagaming Wrote:

(06-06-2012, 11:09 PM)Vitalius Wrote: Ok, I have latest Dolphin, a Wii-mote with motion plus built in that is a TR model.

I followed your steps and everything works up until I try to hit refresh. Windows recognizes it (as Game Controller) and Dolphin even says it has a Wiimote paired (with 1 connected by Pair Up and Refresh) however whenever I click Refresh, nothing happens. The lights just keep blinking and it doesn't vibrate.

On a side note: I have Toshiba Stack installed, however I don't have any software to go along with it. I'm not sure if I should have it or if it should work the exact same as MS's stacks work. I am certain Toshiba stacks are installed.

Any help would be appreciated .

Are you pressing the sync button on the wii controller ? and when you add a new connection with the toshiba you're saying it recognize it.
Does the connected symbol show up in toshiba stack?
are you 100% certain of the toshiba bluetooth stack ?
Could you upload a screenshot of your connected state in bluetooth and dolphin?
Just tested it on a second rig and works atm just fine.

i have the same problem            

[arcticmediagaming]

(06-08-2012, 02:10 PM)jcalvarado07 Wrote:

(06-07-2012, 04:28 AM)arcticmediagaming Wrote:

(06-06-2012, 11:09 PM)Vitalius Wrote: Ok, I have latest Dolphin, a Wii-mote with motion plus built in that is a TR model.

I followed your steps and everything works up until I try to hit refresh. Windows recognizes it (as Game Controller) and Dolphin even says it has a Wiimote paired (with 1 connected by Pair Up and Refresh) however whenever I click Refresh, nothing happens. The lights just keep blinking and it doesn't vibrate.

On a side note: I have Toshiba Stack installed, however I don't have any software to go along with it. I'm not sure if I should have it or if it should work the exact same as MS's stacks work. I am certain Toshiba stacks are installed.

Any help would be appreciated .

Are you pressing the sync button on the wii controller ? and when you add a new connection with the toshiba you're saying it recognize it.
Does the connected symbol show up in toshiba stack?
are you 100% certain of the toshiba bluetooth stack ?
Could you upload a screenshot of your connected state in bluetooth and dolphin?
Just tested it on a second rig and works atm just fine.

i have the same problem

Seems you're connected indeed , so going to wiimote in dolphin and setting it to original wiimote and then pressing refresh doesn't work ?

[Skitty]

(06-06-2012, 11:09 PM)Vitalius Wrote: Ok, I have latest Dolphin, a Wii-mote with motion plus built in that is a TR model.

I followed your steps and everything works up until I try to hit refresh. Windows recognizes it (as Game Controller) and Dolphin even says it has a Wiimote paired (with 1 connected by Pair Up and Refresh) however whenever I click Refresh, nothing happens. The lights just keep blinking and it doesn't vibrate.

On a side note: I have Toshiba Stack installed, however I don't have any software to go along with it. I'm not sure if I should have it or if it should work the exact same as MS's stacks work. I am certain Toshiba stacks are installed.

Any help would be appreciated .

I am having exactly the same problem as this, apart from when I try to install the Toshiba Stack it keeps telling me to insert my Bluetooth device even though the dongle is already plugged in. The controller says its connected on dolphin and the light are blinking continuously but when I go on a game it doesn't work.

[Nintendo898]

Hi, I'm new here, and I'm trying to get Skyward Sword working. I use a Asus BT stack which was default on my Laptop. When I try to connect the Wiimote TR, it vibrates but the lights still blink and it gives no response on the emulation. The lights blink forever after that, Implying, that it's connected in some way. I'm using Dolphin 3.5-1609 on Master branch.

[ExtremeDude2]

You need to use the Toshiba Bluetooth stack