My previous laptop had an i7-4702mq at 2.2ghz (TB up to 3.2ghz). I used to set the multiplier in Intel XTU to about 2.2ghz so that the system would stick to a certain speed but more importantly use multiple cores (rather than just one).
Unfortunately my new CPU (i7 8565u) doesn't support XTU so I am trying to use ThrottleStop. When I turn of TB, the speed is at 1.8ghz which is way too low for Dolphin. When I set the TB limit to 30 in the FIVR menu, it sticks to that ceiling but the speed continues to vary.
As a result I'm getting worse performance, any ideas on how I can get it to stick to one speed?
Unfortunately my new CPU (i7 8565u) doesn't support XTU so I am trying to use ThrottleStop. When I turn of TB, the speed is at 1.8ghz which is way too low for Dolphin. When I set the TB limit to 30 in the FIVR menu, it sticks to that ceiling but the speed continues to vary.
As a result I'm getting worse performance, any ideas on how I can get it to stick to one speed?
New: Dell Inspiron 15 7580 | Intel i7-8565U @ 1.8 GHz | 16 GB DDR4 RAM | GeForce MX150 2 GB
Old: Lenovo IdeaPad Z510 | Intel i7-4702MQ @ 2.2 GHz | 6 GB DDR3 RAM | GeForce GT 740M 1 GB
Old: Lenovo IdeaPad Z510 | Intel i7-4702MQ @ 2.2 GHz | 6 GB DDR3 RAM | GeForce GT 740M 1 GB