Have you tried performing the clean install of the latest drivers with DDU ?
If that doesn't' help, try clean installing previous versions of the driver.
Also there was an optimum backend to use with Ubershaders according to GPU brand, don't know if if it's still 100 % accurate anymore.
This was written on the Ubershaders 2.0 article on July 30th 2017 :
AMD on Windows :
– Use D3D for Hybrid mode.
– Use D3D or Vulkan for Exclusive Mode.
– The AMD OpenGL driver is just slow in general.
Intel on Windows :
– Use D3D for Hybrid mode. Exclusive Mode does work, but Intel iGPUs are currently not fast enough to run it at fullspeed even at 1x native.
– Driver generates variants with OpenGL meaning stuttering.
– The Vulkan driver only supports Skylake+, and is too buggy to be worth using currently.
Doesn't hurt checking, but make sure that Dolphin is using your AMD GPU and not your processor's iGPU.
If that doesn't' help, try clean installing previous versions of the driver.
Also there was an optimum backend to use with Ubershaders according to GPU brand, don't know if if it's still 100 % accurate anymore.
This was written on the Ubershaders 2.0 article on July 30th 2017 :
AMD on Windows :
– Use D3D for Hybrid mode.
– Use D3D or Vulkan for Exclusive Mode.
– The AMD OpenGL driver is just slow in general.
Intel on Windows :
– Use D3D for Hybrid mode. Exclusive Mode does work, but Intel iGPUs are currently not fast enough to run it at fullspeed even at 1x native.
– Driver generates variants with OpenGL meaning stuttering.
– The Vulkan driver only supports Skylake+, and is too buggy to be worth using currently.
Doesn't hurt checking, but make sure that Dolphin is using your AMD GPU and not your processor's iGPU.
OS : Windows 11 Pro
CPU : i7-7700K (4.8 GHz)
GPU : GTX 1080 Ti FTW3 HYBRID (2 GHz)
RAM : G.Skill Trident Z RGB 16 GB DDR4 3000 MHz C14
Dolphin : latest dev
CPU : i7-7700K (4.8 GHz)
GPU : GTX 1080 Ti FTW3 HYBRID (2 GHz)
RAM : G.Skill Trident Z RGB 16 GB DDR4 3000 MHz C14
Dolphin : latest dev