Help! vJoy Device/Wii-Dolphin not responding

[Smas]

Hi, I am currently trying to set up my gamecube controller to work on my PC in order to play a Wii Game on Dolphin. (Ignore the german language in the screenshot btw)
The only issue: I have successfully installed the "Gamecube USB Adapter Driver" & the "vJoy Device Driver" and successfully launched the GCN Driver + the ports have been detected (as seen in the Screenshot).
My PC/WiiU GCN adapter and the GCN Controller are also plugged in correctly (in the correct ports) and I have tested this by launching and playing a GCN game on the dolphin launcher.

NOW to the issue after doing all that and launching GCN Driver + port detection, I can see the installed Gamecontrollers aka. the vJoy devices, but if I want to check the properties to see if the movement of the GCN sticks/buttons is being registered, neither of the 4 vJoy devices are responding and/or reacting in anyway (as you can tell by the crosshair being in the middle in the vJoy properties window).

So when I launch Dolphin and try to configure a simulated Wiimote, there is no Feedback from the Controller to configure the inputs.

I have tried uninstalling everything and reinstalling said programs, I tried reinstalling the Zadig driver before launching it aswell, all of it to no avail.

I hope someone here can help me in some way. Thank you in advance.

[Craftyawesome]

Some Wii games support GC controllers normally. Just set the adapter to Wii U and choose gamecube adapter for wii u under port 1. If the driver isn't working, follow https://wiki.dolphin-emu.org/index.php?title=How_to_use_the_Official_GameCube_Controller_Adapter_for_Wii_U_in_Dolphin

If the game doesn't support GC controllers, I would just use PC mode with the original drivers. Uninstall the drivers if you accidentally overwrote PC mode.


Maybe the Wii U mode with that software could maybe have lower latency or more accurate analog values? If you do want to continue using this, maybe try following the none of the inputs work section and pretend windows 8 means 8+ http://m4sv.com/page/wii-u-gcn-usb-driver

[notmiguel]

(08-08-2021, 09:09 AM)Smas Wrote: Hi, I am currently trying to set up my gamecube controller to work on my PC in order to play a Wii Game on Dolphin. (Ignore the german language in the screenshot btw)
The only issue: I have successfully installed the "Gamecube USB Adapter Driver" & the "vJoy Device Driver" and successfully launched the GCN Driver + the ports have been detected (as seen in the Screenshot).
My PC/WiiU GCN adapter and the GCN Controller are also plugged in correctly (in the correct ports) and I have tested this by launching and playing a GCN game on the dolphin launcher.

NOW to the issue after doing all that and launching GCN Driver + port detection, I can see the installed Gamecontrollers aka. the vJoy devices, but if I want to check the properties to see if the movement of the GCN sticks/buttons is being registered, neither of the 4 vJoy devices are responding and/or reacting in anyway (as you can tell by the crosshair being in the middle in the vJoy properties window).

So when I launch Dolphin and try to configure a simulated Wiimote, there is no Feedback from the Controller to configure the inputs.

I have tried uninstalling everything and reinstalling said programs, I tried reinstalling the Zadig driver before launching it aswell, all of it to no avail.

I hope someone here can help me in some way. Thank you in advance.

Didi you try Zadig?