i red some infos about ocing , now i think i can do it , here is my spec i need yours advice
about ram :
2gb dual channel buss 800
about ram :
2gb dual channel buss 800
help me OC please ?
|
i red some infos about ocing , now i think i can do it , here is my spec i need yours advice
about ram : 2gb dual channel buss 800 10-06-2010, 03:11 PM
(This post was last modified: 10-06-2010, 03:12 PM by NaturalViolence.)
Going to quote myself from when I helped someone else overclock:
Quote:The hardware you will need. Please make sure you have a decent power supply and an aftermarket air cooler (never try to overclock on stock cooling, EVER) before you even try to OC.
"Normally if given a choice between doing something and nothing, I’d choose to do nothing. But I would do something if it helps someone else do nothing. I’d work all night if it meant nothing got done."
-Ron Swanson "I shall be a good politician, even if it kills me. Or if it kills anyone else for that matter. " -Mark Antony
i have all required conditions , but which one is better : increase multiplier ratio or cpu bus speed ?
do i need to increase my bus ram too ? my bus ram is 800mhz but cpuz showed only 400mhz what's the problem here ? to be in short what i will do : - enter bios - increase multiplier or cpu bus speed ? save and exit done ? 10-07-2010, 04:40 AM
(This post was last modified: 10-07-2010, 04:41 AM by NaturalViolence.)
Quote:increase multiplier ratio or cpu bus speed ? Multiplier. However you can't do that since the multiplier is locked on your cpu. Quote:do i need to increase my bus ram too ? my bus ram is 800mhz but cpuz showed only 400mhz what's the problem here ? You mean memory frequency? Quote:- enter bios -enter bios -raise fsb to 1333 (or 400 if your bios displays real fsb) if you can, if not use a lower number -save end exit -VICTORY IS MINE!
"Normally if given a choice between doing something and nothing, I’d choose to do nothing. But I would do something if it helps someone else do nothing. I’d work all night if it meant nothing got done."
-Ron Swanson "I shall be a good politician, even if it kills me. Or if it kills anyone else for that matter. " -Mark Antony 10-07-2010, 10:28 AM
yah i did it tried to increase cpu bus from 200 to 230
do i need to increase bus ram too ? ( ram frequency ) there are 3 options of ram frequency auto - 600mhz - 800mhz i pick auto should i pick 800 one ? 10-07-2010, 02:39 PM
If the ram is rated at 800MHz then leave it at 800MHz. You only need to raise the fsb.
"Normally if given a choice between doing something and nothing, I’d choose to do nothing. But I would do something if it helps someone else do nothing. I’d work all night if it meant nothing got done."
-Ron Swanson "I shall be a good politician, even if it kills me. Or if it kills anyone else for that matter. " -Mark Antony
when i was trying to raise to FSB to a higher value , after booting screen i got this kind of screen :
[ it says about something wrong , error] 2 options : 1 . let win down fix the problem -> if i pick this one it gives me a blue-error-screen 2 . start windows with its regular settings hmm what does this mean ? was i lacking in Vcore or ? what if i ignored this error and start windows with its regular settings ? 10-08-2010, 03:43 AM
(This post was last modified: 10-08-2010, 03:44 AM by NaturalViolence.)
You still haven't told me your full load temps. Remember to set the voltages to the stock values manually instead of leaving them on auto. How high did you raise the fsb?
"Normally if given a choice between doing something and nothing, I’d choose to do nothing. But I would do something if it helps someone else do nothing. I’d work all night if it meant nothing got done."
-Ron Swanson "I shall be a good politician, even if it kills me. Or if it kills anyone else for that matter. " -Mark Antony 10-08-2010, 09:22 PM
when oc never raise 30 fsb one shot dude me a make a raise off 5 max and after that a make test with occt after 2 hours without error a max a go again in my bios raise again till i go to the best after make a 24 hour test and it done same with multiplicator every step it like this and if you have timming you ram untimming them and oc after all ok retimming them very sorry my poor english
hot temp can broke cpu board is why we make test use cpu 100 pourcent with monitoring |
« Next Oldest | Next Newest »
|