Help! Gamecube sticks don't work with dolphin!

[wannaboyzelda]

(12-09-2014, 07:22 AM)KHg8m3r Wrote: Choosing Dinput is just another way to read the commands coming in. And since it's the /0/ object, it is the port 1 of your controller adapter, and what you should be using. You'll maybe have to remap the stick buttons in the gcpad settings, but it should solve your issue.
I'll try, see if that solves it.

[KHg8m3r]

Helpful hint: make sure you're not typing inside the quotes

[wannaboyzelda]

Ok, I've put it in another port and now it doesn't respond in Dolphin at all.

---

New problem, now the main stick can only go left-right in the calibration menu, C stick can go which ever way but main stick only moves side to side. The sticks still aren't recognized in Dolphin.

[KHg8m3r]

Keep it in the first port on the adapter, and then in Dolphin dropdown bar, select the /0/ device.

[wannaboyzelda]

(12-10-2014, 04:15 AM)KHg8m3r Wrote: Keep it in the first port on the adapter, and then in Dolphin dropdown bar, select the /0/ device.

Doesn't change anything, still not recognized in dolphin controller settings, or in game. Buttons still work.

[wannaboyzelda]

Okay, so I just downloaded the newest version of Dolphin (4.0 4565) and now the sticks work. I'm having problems with the main stick though, specifically with it going up. Manually setting the value to "y-" doesn't seem to work.

---

Well, I have no idea how it got fixed but it seems it kind of did by chance (go figure). Well, I'll leave this thread open on the off chance that anyone else finds a solution to their problem in it.

[KHg8m3r]

Well I'm glad its working now

[wannaboyzelda]

Now the cursor starts moving on it's own when I press down, anyone know what's up?

---

In the calibration setting the main sticks Y axis is stuck on 238, I can fidget with it but can't center it.