I know there have been several threads asking for help with this problem and I've seen a few, but none helped. My problem is that when I go to lightly press my L or R triggers, the emulator thinks I'm not pressing at all. Then, when I press a little harder, it thinks I'm pressing all the way. I believe this has something to do with the threshold and I've tried adjusting that but to no avail. If someone could help me fix this or provide a link to a thread that would help, I would really appreciate it. Thanks!
Help calibrating my xBox controller's triggers
|
12-22-2013, 10:27 PM
Show your config.
You will most likely want your right trigger mapped to both R and R-Analog. (and the same for the left) (searching the forum would probably reveal this) 12-23-2013, 12:18 AM
(12-22-2013, 10:27 PM)Billiard26 Wrote: Show your config.I searched and I did what they all said but nothing really worked. They all just said to lower the threshold. 12-23-2013, 01:11 AM
actually you didn't set L-Analog and R-Analog so you have just L and R like a button.
P6T i7 920 @3.65Ghz-1.15v | Kingston 2x4GB 9-9-9-24 1600MHz | BeQuiet StraightPower E6-600W 48a/12v
MSI N560Gtx Ti TwinFrozr II/oc @990MHz-1.062v RVL-CNT-01-TR with ToshibaStack 12-23-2013, 01:19 AM
(12-23-2013, 01:11 AM)Soopah Wrote: actually you didn't set L-Analog and R-Analog so you have just L and R like a button.I went off of a picture of a GameCube controller when I configured this. I didn't see anything labeled as L or R analog. I just used the back triggers. What am I supposed to set as the analog? 12-23-2013, 07:55 AM
I found the problem. I didn't know that the analog was also supposed to be set up with the triggers. This thread can be locked or deleted.
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)