This is a call out to anyone with this issue and is to lazy to post on the forums for it, and had the same issues I had.
After much searching, i found something very useful, and enables the controller to work.
"Yes, renaming SDL.dll to SDL_old.dll and SDL.1.3.dll to just plain SDL.dll
does temporarily fix the problem. With that being said however, you will need to
reconfigure all njoy controllers or keyboards. Whatever you are using for input. Like
as said above if you do not, the axis's will be reversed and other buttons will be
screwed up. Easiest way is just to redo all the settings."
If you do this, NJoy will have no issue mapping your sticks.
Happy gaming!
PS: If you have other issues, look at the "issue" area, http://code.google.com/p/dolphin-emu/issues/list there's a search bar, so use it!
After much searching, i found something very useful, and enables the controller to work.
"Yes, renaming SDL.dll to SDL_old.dll and SDL.1.3.dll to just plain SDL.dll
does temporarily fix the problem. With that being said however, you will need to
reconfigure all njoy controllers or keyboards. Whatever you are using for input. Like
as said above if you do not, the axis's will be reversed and other buttons will be
screwed up. Easiest way is just to redo all the settings."
If you do this, NJoy will have no issue mapping your sticks.
Happy gaming!
PS: If you have other issues, look at the "issue" area, http://code.google.com/p/dolphin-emu/issues/list there's a search bar, so use it!