NOTE: This guide assumes you already know what MCEs are. This essential to using the Hydra, so I suggest you head to the Sixense Forums to find out all about it, if you don't know MCEs yet.
If you're just here to find out if you can use the Hydra with Dolphin: Yes, you can and it works pretty well using this guide.
===INTRODUCTION===
This is an MCE for the Wii Emulator Dolphin. It's for games that use the Wiimote and Nunchuk.
There's already another MCE for Dolphin on the internet, but I didn't like it. So I made my own,
and I think it's pretty good. Tilting, Shaking and Swinging work on both controllers.
===CONTROLS===
The bindings are all properly named in the MCE Editor, so you can easily change them if you don't like my bindings.
-Right Controller (resembles Wii Remote)
Stick: DPAD
Button 3: A
Trigger: B
Button 4: –
Button 2: +
You move the Pointer with this controller.
Note: The Wii Remote's 1 and 2 Buttons didn't fit onto the right controller, so I've moved them to the left controller.
-Left Controller (resembles Nunchuk)
Stick: Nunchuk Stick
Bumper: C
Trigger: Z
Button 4: 1
Button 2: 2
===INSTALLATION===
1. Download the attached .zip file and extract it. (Dropbox link below for Guests)
2. Put the .mce file here: C:\Users\YOUR USER NAME\Documents\Sixense Entertainment\MotionCreator 2\configs
3. Put the .ini file here: C:\Program Files\Dolphin\User\Config\Profiles\Wiimote (depends on where you installed Dolphin to)
4. Now we need to load the .ini file so Dolphin correctly recognizes the key presses it gets from MotionCreator.
This will overwrite you existing binds in Dolphin.
Open Dolphin, click the icon Wiimote. Set Wiimote 1 to "Emulated Wiimote", then click "Configure".
Select "Razer Hydra" as profile, then click "Load". Press OK.
5. Start MotionCreator or click "Rescan" in MotionCreator if it is already running.
Done! Now you can play. MotionCreator always needs to run if you want to use the Hydra with it.
Should there be any problems, just post them here and I'll help.
Feedback is appreciated.
Please do not redistribute this file. Instead, link to the forums thread, so people can always get the latest version.
Dropbox Link: https://dl.dropbox.com/u/35144377/Dolphi...kus_V1.zip
If you're just here to find out if you can use the Hydra with Dolphin: Yes, you can and it works pretty well using this guide.
===INTRODUCTION===
This is an MCE for the Wii Emulator Dolphin. It's for games that use the Wiimote and Nunchuk.
There's already another MCE for Dolphin on the internet, but I didn't like it. So I made my own,
and I think it's pretty good. Tilting, Shaking and Swinging work on both controllers.
===CONTROLS===
The bindings are all properly named in the MCE Editor, so you can easily change them if you don't like my bindings.
-Right Controller (resembles Wii Remote)
Stick: DPAD
Button 3: A
Trigger: B
Button 4: –
Button 2: +
You move the Pointer with this controller.
Note: The Wii Remote's 1 and 2 Buttons didn't fit onto the right controller, so I've moved them to the left controller.
-Left Controller (resembles Nunchuk)
Stick: Nunchuk Stick
Bumper: C
Trigger: Z
Button 4: 1
Button 2: 2
===INSTALLATION===
1. Download the attached .zip file and extract it. (Dropbox link below for Guests)
2. Put the .mce file here: C:\Users\YOUR USER NAME\Documents\Sixense Entertainment\MotionCreator 2\configs
3. Put the .ini file here: C:\Program Files\Dolphin\User\Config\Profiles\Wiimote (depends on where you installed Dolphin to)
4. Now we need to load the .ini file so Dolphin correctly recognizes the key presses it gets from MotionCreator.
This will overwrite you existing binds in Dolphin.
Open Dolphin, click the icon Wiimote. Set Wiimote 1 to "Emulated Wiimote", then click "Configure".
Select "Razer Hydra" as profile, then click "Load". Press OK.
5. Start MotionCreator or click "Rescan" in MotionCreator if it is already running.
Done! Now you can play. MotionCreator always needs to run if you want to use the Hydra with it.
Should there be any problems, just post them here and I'll help.
Feedback is appreciated.
Please do not redistribute this file. Instead, link to the forums thread, so people can always get the latest version.
Dropbox Link: https://dl.dropbox.com/u/35144377/Dolphi...kus_V1.zip