In the configuration basic settings i enabled everything except for the cheats and the set the framelimit to 50 and this is really good for the FPS which stays around the 20. In the advanced settings i enabled everything except for the optimize quantizers, the LLE DSP is also checked because i'm using the plugin DSP HLE (by the way: what's this and which one is the best for me? The DSP HLE or DSP LLE?).
In the Gfx general there's no diference in the FPS when setting the resolution to native or any other and also enable the autoscale. All the other things in the advance display settings are unchecked. In the enhancements i don't really know what are the first two things but i put the both in 2x, the force bi/trilinear is unchecked and the post processing shader is off.
In the advanced the EFB copy is disabled and this is also very important because the FPS goes up from 20 to 25. Everything else is unchecked.
Setting the config and gfx this way was good to me because now i can play with the FPS around 25 and i can see the main hall when Jill, Chris and Wesker enter the house for the first time. Yesterday without these settings i couldn't see a thing except for 3 shadows which were the 3 charaters and 2 blue lights which probably were the candles, everything else was dark. The FPS at this point is still a little slow, around 12 (without these settings the FPS was around 8) but when i start playing the FPS goes up to 25 -/+. Still in the main hall when the camera changes for the first time after the main door opens i see some green lines all over the screen but this also desapears when i start playing and in the first room, in the middle, i see many white lines which looks like a spider web or a curtain. Maybe all this is because of my poor PC. I don't think i should worry about this right? The CPU still works at 100% when i'm playing and this really worries me. I think i'm pushing the CPU to it's edge. Should i stop playing?
In the Gfx general there's no diference in the FPS when setting the resolution to native or any other and also enable the autoscale. All the other things in the advance display settings are unchecked. In the enhancements i don't really know what are the first two things but i put the both in 2x, the force bi/trilinear is unchecked and the post processing shader is off.
In the advanced the EFB copy is disabled and this is also very important because the FPS goes up from 20 to 25. Everything else is unchecked.
Setting the config and gfx this way was good to me because now i can play with the FPS around 25 and i can see the main hall when Jill, Chris and Wesker enter the house for the first time. Yesterday without these settings i couldn't see a thing except for 3 shadows which were the 3 charaters and 2 blue lights which probably were the candles, everything else was dark. The FPS at this point is still a little slow, around 12 (without these settings the FPS was around 8) but when i start playing the FPS goes up to 25 -/+. Still in the main hall when the camera changes for the first time after the main door opens i see some green lines all over the screen but this also desapears when i start playing and in the first room, in the middle, i see many white lines which looks like a spider web or a curtain. Maybe all this is because of my poor PC. I don't think i should worry about this right? The CPU still works at 100% when i'm playing and this really worries me. I think i'm pushing the CPU to it's edge. Should i stop playing?