[GC] The Legend of Zelda: The Wind Waker

[aronsein]

Thanks very much for the rapid response. As it turns out, those are exactly my graphics settings already. Could this be the RAM then?
If the graphics card is the problem, there is a HD 6850 on its way to me now.

[Garteal]

The Intel HD2000 is probably too slow even for the x1 Internal Resolution.

With the HD6850, you will then be able to raise your Internal Resolution to x4 without losing performance.
Upgrading your RAM has negligible impact on Dolphin.

[aronsein]

ah ok
thanks again for the rapid responses from both of you guys
I really appreciate it

[xHaydenx]

Playing through this game at the moment for the first time on Dolphin. Had a few glitches but nothing I couldn't fix. Totally loving it so far.

I have a question about the widescreen hack though. I've tried forcing it to 16:19 and turning the hack on, but I've noticed that there's some problems outside the 4:3 area. It's mainly objects at a certain distance like pots and trees for example, dissapear suddenly once outside the 4:3 area.

I've read that using the widescreen hack causes problems. Is there really any way to fix this? Or is it better to just play in 4:3?

[NaturalViolence]

What does the word hack mean (rhetorical question)?

[xHaydenx]

Yeah, okay. I just thought there might be something I could do or enable that would let it render those objects correctly. Ah well, Still looks amazing at 4:3 with all the extra graphic boosts.


Thanks.

[tsandrews85]

So I downloaded Dolphin the other day and tried to play WW as a test I booted it up and ran the .ISO, It runs okay untill I actually get into the game then the frames drop from 30-15 then shoot back up to 30 then drop back down to 15 and this happens constantly over and over I have tried adjusting the settings but Im pretty sure my rig should be able to handle anything this emu has to offer. I'm puzzled.? While running Dolphin I Ctl+Alt+Delete and looked at system resources when the game was running at 30 fps my Processor was at about 20% load then my frames took a dive and the Processor was up to 80-90%


System Information
------------------
Time of this report: 5/23/2012, 20:38:27
Machine name: OWNER-PC
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120330-1504)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 08/23/10 14:48:45 Ver: 08.00.14
Processor: AMD Phenom™ 9950 Quad-Core Processor (4 CPUs), ~2.6GHz
Memory: 4096MB RAM
Available OS Memory: 4096MB RAM
Page File: 2831MB used, 5356MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: AMD Radeon HD 6670
Manufacturer: Advanced Micro Devices, Inc.
Chip type: ATI display adapter (0x6758)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_6758&SUBSYS_31811682&REV_00
Display Memory: 2803 MB
Dedicated Memory: 1012 MB
Shared Memory: 1791 MB
Current Mode: 1360 x 768 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: SAMSUNG
Monitor Id: SAM07BC
Native Mode: 1360 x 768(p) (60.015Hz)
Output Type: HDMI
Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1124 (English)
Driver Version: 8.961.0.0
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 4/5/2012 19:20:04, 1067520 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-2418-11CF-5671-8B11BEC2C535}
Vendor ID: 0x1002
Device ID: 0x6758
SubSys ID: 0x31811682
Revision ID: 0x0000

[Zee530]

Screenshots of your ALL dolphin settings
Dolphins uses only 2 cores so you should see only 50% at most or 75% when using LLE on thread
Also check your temps

[rigggs]

Greetings,

Loving dolphin so far, however, I have ran into a problem with the NPC's all being discolored. More specifically they are all SUPER bright orange or yellow. Here's a picture of the problem... Thanks!

http://imgur.com/rtVKr

[NaturalViolence]

Revision?
Settings?
Specs?
OS?